Clean Walls for Optimal Paint Adhesion

What happens in this clip

A clean wall is crucial for a quality paint job. Start by vacuuming any dust from the walls, especially along the baseboards and crown molding. After vacuuming, perform a quick wipe-down of the walls with a damp rag to remove any remaining dust or light dirt. If your walls have oil, grease, or other stubborn residue, prepare a solution of trisodium phosphate (TSP) according to the product's instructions. Wear protective gloves and eye protection when working with TSP. Wash the affected areas thoroughly with the TSP solution, then rinse the walls with clean water using a damp rag. Allow the walls to dry completely before proceeding.

Goal: Ensure walls are free of dust and residue

What's used

Tools

• Bucket
• Damp Rag
• Microfiber cloth
• rinsing after TSP
• Protective Gloves
• Safety Glasses
• Vacuum Cleaner

Materials

• Trisodium Phosphate (TSP) SAVOGRAN
• Sugar soap

About the full video

This project provides a comprehensive guide on preparing a room for painting, covering essential steps from protecting furniture and surfaces to repairing imperfections, thorough cleaning, and appropriate priming to ensure a smooth, durable, and professional-looking paint job.

Step 2 of 9: Inspect and Clean Walls

Inspect the interior walls of the closet for any damage, moisture, or pests. Clean the walls to remove dust, cobwebs, and any grime. This ensures a clean surface for painting or wallpapering.

Open this step in the guide

Other videos for this step

• Clean and Degrease Walls
• Clean and Dry the Wall