Apply New Wall Color
From Reading Nook Conversion · Step 6 of 9 · Video by Ace Hardware
Showing 1:44–2:29 of the source video.
What happens in this clip
After the primer has dried according to manufacturer instructions, it's time to apply your new wall color. The video uses 'Clark+Kensington Stone Fireplace' paint. First, prepare your brush: dip it halfway into the paint and offload any excess by pressing it against the inside of the paint can or a bucket. Use this paintbrush to 'cut in' a 2 to 3 inch border around the edges of the wall and any frames. It is recommended to paint one wall at a time to maintain a wet edge. Once the cutting-in is complete, open the paint can, stir the paint thoroughly, and then pour it into a paint tray with a liner. Begin rolling the main areas of the wall, using a technique called 'working to a wet edge.' Roll back and forth across the wall in a series of W or V shaped strokes, ensuring continuous coverage from top to bottom. This technique prevents lap marks and ensures a uniform finish. Apply additional coats as needed until the desired color depth and coverage are achieved, allowing adequate drying time between coats.
Goal: Apply the new wall color for a finished look.
What's used
Tools
- Paint Can Opener
- Paint Roller
- Paint Tray Liner
- Paint Tray
- Paintbrush
- Roller Frame
- Stir Stick
Materials
- Clark+Kensington Stone Fireplace Paint Clark+Kensington
- Sherwin-Williams SuperPaint Interior Acrylic Latex
About the full video
This DIY project provides a step-by-step guide on how to effectively paint over a dark-colored wall with a new, lighter paint color. It covers essential preparation steps such as cleaning, repairing, and priming the wall, followed by the application of the final paint color using proper techniques to ensure a smooth, uniform, and long-lasting finish.
What's said in this clip
that's okay it's supposed to look like that my next step is to paint the wall color which is clark and kensington's stone fireplace dip the brush halfway into the paint and offload some of the paint by pushing the brush on the inside of the paint can or bucket first use a paint brush to cut in 2 or 3 inches around the edges of the wall and the frame of your room i recommend painting one wall at a time once you've cut in it's time to start rolling [Music] one of the best painting techniques for walls is called working to a wet edge working top to bottom roll back and forth across the wall in a series of w or v shaped strokes until the section is
Automatically transcribed from the source video.
Step 6 of 9: Paint or Wallpaper Walls
Apply primer if necessary, especially if changing colors dramatically or covering stains. Apply your chosen paint color or wallpaper according to manufacturer instructions. Ensure even coverage and allow adequate drying time between coats.
Other videos for this step
Reading Nook Conversion
Transform an under-stair closet into a cozy and functional reading space by clearing, potentially modifying walls, adding lighting, comfortable seating, and shelving.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.