Wire and Hang New Fixture
From How to Replace a Light Fixture over a Two-Story Stairwell · Step 3 of 4 · Video by The Home Depot

Showing 1:30–1:53 of the source video. Watch the full video with every moment.
What happens in this clip
With the new mounting bracket installed, it's time to connect the new light fixture. Connect the new fixture's black wire to the house's black wire, the new fixture's white wire to the house's white wire, and the new fixture's copper (ground) wire to the house's ground wire. Use wire connectors (often called wire nuts) to securely fasten these connections. If any house wires are frayed, use wire cutters to remove about 3/4-inch of the insulation before making the connection. After securing all connections, carefully tuck all the wires neatly into the ceiling junction box. Finally, position the fixture's canopy over the outlet box and secure it in place using the screws provided with the fixture.
Goal: Connect the new fixture's wiring and secure it to the ceiling
What's used
Tools
- New Light Fixture (main assembly) Smartlite
- Screwdriver Set
- Wire Connectors (Wire Nuts)
- Lever nuts (Wago connectors)
- Wire Cutters
About the full video
This project provides a step-by-step guide on how to safely replace an existing ceiling-mounted light fixture with a new one. It covers unboxing, safely disconnecting power, removing the old fixture, installing the new mounting bracket, wiring the new fixture, and finally assembling and testing the new light.
Step 3 of 4: Install the New Light Fixture
Refer to the new fixture's installation manual. Usually, you'll attach a mounting bracket to the electrical box. Then, connect the wires from the ceiling to the corresponding wires on the new fixture (e.g., black to black, white to white, ground to ground). Use the provided wire nuts to secure the connections. Gently tuck the wires back into the electrical box. Finally, attach the new fixture's base to the mounting bracket and install any bulbs and decorative components.
Every video in How to Replace a Light Fixture over a Two-Story Stairwell
Step 1: De-energize the Circuit
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:31–0:40 Turn Off Power at Breaker
- 0:03–0:05 Shut Off Power to the Circuit
Step 2: Remove the Old Light Fixture
- 0:10–0:28 Remove The Old Fixture
- 0:22–0:34 Remove Old Light Fixture
- 0:02–0:04 Remove Existing Light Fixture
Step 3: Install the New Light Fixture
- 2:46–3:50 Connect New Light Fixture Wiring
- 1:30–1:53 Wire and Hang New Fixture (this video)
- 4:35–5:33 Install Mounting Bracket and Safety Wire
Step 4: Restore Power and Test
- 5:24–5:39 Restore Power and Test
- 10:35–10:39 Restore Power and Test the New Fixtures
- 0:16–0:25 Restore Power and Final Check
How to Replace a Light Fixture over a Two-Story Stairwell
This project outlines the steps for safely replacing a light fixture in a two-story stairwell. It involves gathering necessary tools and materials, safely de-energizing the circuit, removing the old fixture, installing the new fixture, and restoring power.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

