powered by

Remove Old Light Fixture

From How to Replace a Light Fixture over a Two-Story Stairwell · Step 2 of 4 · Video by DeLanceyDIY

Showing 0:22–0:34 of the source video. Watch the full video with every moment.

What happens in this clip

With the power verified OFF, begin removing the old fixture. This usually involves unscrewing a canopy or decorative nuts that hold the fixture to a mounting bracket. Once the fixture is hanging, carefully disconnect the wires: first the ground wire (bare copper), then the white (neutral) wire, and finally the black (hot) wire, by unscrewing or removing the wire nuts. Support the fixture as you disconnect it to prevent it from falling. After all wires are detached, remove the old fixture and its mounting bracket, leaving only the exposed wires from the ceiling junction box.

Goal: Carefully detach and remove the existing light fixture or ceiling fan from the ceiling junction box, disconnecting its wiring.

What's used

Tools

  • Pliers (optional)
  • Screwdriver

About the full video

This video provides a step-by-step guide on how to install a new light fixture using a ceiling junction box. It covers essential safety precautions, removal of an existing fixture, proper wiring connections (ground, neutral, hot), mounting the new fixture, and final installation of the light bulb.

Step 2 of 4: Remove the Old Light Fixture

With the power confirmed off, remove any decorative globes or covers from the old fixture. Unscrew the mounting screws that hold the fixture's base to the ceiling electrical box. Support the fixture as you disconnect the wires. Typically, you'll find black (hot), white (neutral), and green or bare copper (ground) wires. Unscrew wire nuts or use pliers to gently untwist the wire connections. Ensure the wires do not fall back into the electrical box.

Open this step in the guide

Every video in How to Replace a Light Fixture over a Two-Story Stairwell

  1. Step 1: De-energize the Circuit

  2. Step 2: Remove the Old Light Fixture

  3. Step 3: Install the New Light Fixture

  4. Step 4: Restore Power and Test

How to Replace a Light Fixture over a Two-Story Stairwell

This project outlines the steps for safely replacing a light fixture in a two-story stairwell. It involves gathering necessary tools and materials, safely de-energizing the circuit, removing the old fixture, installing the new fixture, and restoring power.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Remove Old Light Fixture — How to Replace a Light Fixture over a Two-Story Stairwell | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.