Restore Power and Test
From How to Replace a Light Fixture over a Two-Story Stairwell · Step 4 of 4 · Video by seejanedrill

Showing 5:24–5:39 of the source video. Watch the full video with every moment.
What happens in this clip
Once the new light fixture is fully assembled and secured, return to your electrical panel. Remove the warning sign and flip the circuit breaker back to the 'on' position. Go to the light switch that controls the fixture and turn it on to test the new light. It should illuminate immediately, signifying a successful installation.
Goal: Verify the new light fixture is working correctly.
What's used
Tools
- Electrical Panel (Breaker Box)
About the full video
This project provides a detailed, step-by-step guide on how to safely replace an existing ceiling light fixture with a new one. It covers essential safety precautions, proper removal of the old fixture, correct wiring procedures for the new fixture (including ground, neutral, and hot connections), and final assembly.
Step 4 of 4: Restore Power and Test
Once the new fixture is securely installed, return to the electrical panel. Flip the circuit breaker back to the 'on' position. Go back to the stairwell and test the new light fixture by operating the light switch. Ensure the light turns on and operates correctly.
Every video in How to Replace a Light Fixture over a Two-Story Stairwell
Step 1: De-energize the Circuit
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:31–0:40 Turn Off Power at Breaker
- 0:03–0:05 Shut Off Power to the Circuit
Step 2: Remove the Old Light Fixture
- 0:10–0:28 Remove The Old Fixture
- 0:22–0:34 Remove Old Light Fixture
- 0:02–0:04 Remove Existing Light Fixture
Step 3: Install the New Light Fixture
- 2:46–3:50 Connect New Light Fixture Wiring
- 1:30–1:53 Wire and Hang New Fixture
- 4:35–5:33 Install Mounting Bracket and Safety Wire
Step 4: Restore Power and Test
- 5:24–5:39 Restore Power and Test (this video)
- 10:35–10:39 Restore Power and Test the New Fixtures
- 0:16–0:25 Restore Power and Final Check
How to Replace a Light Fixture over a Two-Story Stairwell
This project outlines the steps for safely replacing a light fixture in a two-story stairwell. It involves gathering necessary tools and materials, safely de-energizing the circuit, removing the old fixture, installing the new fixture, and restoring power.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

