Connect New Light Fixture Wiring
From How to Replace a Light Fixture over a Two-Story Stairwell · Step 3 of 4 · Video by Bootstrappin'

Showing 2:46–3:50 of the source video. Watch the full video with every moment.
What happens in this clip
Now it's time to connect the new light fixture's wiring. Identify the wires from the ceiling: typically black (hot), white (neutral), and bare copper (ground). On the new fixture, you'll also have corresponding wires. Connect the hot wire (often black or red from the ceiling, black from the fixture) to the corresponding hot wire using a wire nut, twisting clockwise until secure. Connect the neutral wires (white to white) similarly with a wire nut. For the ground wire, wrap the bare copper wire from the ceiling around the green grounding screw on the mounting strap in a clockwise direction, then connect it to the new fixture's ground wire (if present) and tighten the screw. For added security, you can wrap electrical tape around each wire nut connection. Always ensure connections are tight and no bare wire is exposed. If your home has older two-conductor wiring without a separate ground, the fixture's ground wire should be connected to the mounting strap and the electrical box itself, which acts as the ground.
Goal: Establish electrical connections for the new fixture.
What's used
Tools
- Electrical Tape
- Screwdriver
- Wire Nuts
About the full video
This video provides a comprehensive guide on how to safely replace an existing flush mount light fixture with a new one. The process covers essential safety steps, including disabling power, removing the old fixture, installing a new mounting bracket, making correct electrical wiring connections (hot, neutral, and ground), and finally, installing the new fixture and testing its operation.
Step 3 of 4: Install the New Light Fixture
Refer to the new fixture's installation manual. Usually, you'll attach a mounting bracket to the electrical box. Then, connect the wires from the ceiling to the corresponding wires on the new fixture (e.g., black to black, white to white, ground to ground). Use the provided wire nuts to secure the connections. Gently tuck the wires back into the electrical box. Finally, attach the new fixture's base to the mounting bracket and install any bulbs and decorative components.
Every video in How to Replace a Light Fixture over a Two-Story Stairwell
Step 1: De-energize the Circuit
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:31–0:40 Turn Off Power at Breaker
- 0:03–0:05 Shut Off Power to the Circuit
Step 2: Remove the Old Light Fixture
- 0:10–0:28 Remove The Old Fixture
- 0:22–0:34 Remove Old Light Fixture
- 0:02–0:04 Remove Existing Light Fixture
Step 3: Install the New Light Fixture
- 2:46–3:50 Connect New Light Fixture Wiring (this video)
- 1:30–1:53 Wire and Hang New Fixture
- 4:35–5:33 Install Mounting Bracket and Safety Wire
Step 4: Restore Power and Test
- 5:24–5:39 Restore Power and Test
- 10:35–10:39 Restore Power and Test the New Fixtures
- 0:16–0:25 Restore Power and Final Check
How to Replace a Light Fixture over a Two-Story Stairwell
This project outlines the steps for safely replacing a light fixture in a two-story stairwell. It involves gathering necessary tools and materials, safely de-energizing the circuit, removing the old fixture, installing the new fixture, and restoring power.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

