Restore Power and Final Check
From How to Replace a Light Fixture over a Two-Story Stairwell · Step 4 of 4 · Video by Angela Rose | DIY and Design

Showing 0:16–0:25 of the source video. Watch the full video with every moment.
What happens in this clip
Return to your circuit breaker panel and switch the breaker back to the 'on' position. Return to the room and flip the light switch to test your new fixture. If the light turns on, congratulations! You have successfully installed your new light fixture. Take a moment to ensure all components are secure and the light is operating as expected. If the light does not turn on, immediately turn off the power at the breaker and re-check all your electrical connections.
Goal: Restore power to the circuit and test the new light fixture to ensure it functions correctly, then admire your updated lighting.
What's used
Tools
- Circuit Breaker Panel
About the full video
This guide provides verbose, step-by-step instructions for safely and efficiently replacing an old light fixture with a new one using existing ceiling wiring. It covers crucial safety precautions, electrical connections, mounting the fixture, and final assembly, transforming the aesthetic and functionality of a space.
Step 4 of 4: Restore Power and Test
Once the new fixture is securely installed, return to the electrical panel. Flip the circuit breaker back to the 'on' position. Go back to the stairwell and test the new light fixture by operating the light switch. Ensure the light turns on and operates correctly.
Every video in How to Replace a Light Fixture over a Two-Story Stairwell
Step 1: De-energize the Circuit
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:31–0:40 Turn Off Power at Breaker
- 0:03–0:05 Shut Off Power to the Circuit
Step 2: Remove the Old Light Fixture
- 0:10–0:28 Remove The Old Fixture
- 0:22–0:34 Remove Old Light Fixture
- 0:02–0:04 Remove Existing Light Fixture
Step 3: Install the New Light Fixture
- 2:46–3:50 Connect New Light Fixture Wiring
- 1:30–1:53 Wire and Hang New Fixture
- 4:35–5:33 Install Mounting Bracket and Safety Wire
Step 4: Restore Power and Test
- 5:24–5:39 Restore Power and Test
- 10:35–10:39 Restore Power and Test the New Fixtures
- 0:16–0:25 Restore Power and Final Check (this video)
How to Replace a Light Fixture over a Two-Story Stairwell
This project outlines the steps for safely replacing a light fixture in a two-story stairwell. It involves gathering necessary tools and materials, safely de-energizing the circuit, removing the old fixture, installing the new fixture, and restoring power.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

