Turn Off Power at Circuit Breaker
From How to Replace a Light Fixture over a Two-Story Stairwell · Step 1 of 4 · Video by This Old House

Showing 0:50–1:05 of the source video. Watch the full video with every moment.
What happens in this clip
Before proceeding with any electrical work, locate the main electrical panel (usually in a basement or utility room) and identify the circuit breaker that controls the light fixture. Turn this breaker to the 'OFF' position. Double-check that the power is indeed off at the light fixture itself by attempting to turn it on via the wall switches, which should now be unresponsive. This is a critical safety step to prevent electrical shock.
Goal: Ensure no power reaches the light fixture to be worked on.
About the full video
This project guides you through relocating an existing ceiling light fixture from an off-center position to a new, centered location above a dining table. It involves safely disconnecting the old fixture, identifying the power source, marking the new position, preparing the ceiling for a new junction box, installing a fan brace and junction box, connecting the new light fixture's wiring, and finally testing the installation.
Step 1 of 4: De-energize the Circuit
Go to your home's electrical panel. Identify the breaker that controls the light fixture in the stairwell. Flip the breaker to the 'off' position. To ensure the power is completely off, use a non-contact voltage tester near the existing fixture's wiring after removing the old fixture's cover. This is a critical safety step.
Every video in How to Replace a Light Fixture over a Two-Story Stairwell
Step 1: De-energize the Circuit
- 0:50–1:05 Turn Off Power at Circuit Breaker (this video)
- 0:31–0:40 Turn Off Power at Breaker
- 0:03–0:05 Shut Off Power to the Circuit
Step 2: Remove the Old Light Fixture
- 0:10–0:28 Remove The Old Fixture
- 0:22–0:34 Remove Old Light Fixture
- 0:02–0:04 Remove Existing Light Fixture
Step 3: Install the New Light Fixture
- 2:46–3:50 Connect New Light Fixture Wiring
- 1:30–1:53 Wire and Hang New Fixture
- 4:35–5:33 Install Mounting Bracket and Safety Wire
Step 4: Restore Power and Test
- 5:24–5:39 Restore Power and Test
- 10:35–10:39 Restore Power and Test the New Fixtures
- 0:16–0:25 Restore Power and Final Check
How to Replace a Light Fixture over a Two-Story Stairwell
This project outlines the steps for safely replacing a light fixture in a two-story stairwell. It involves gathering necessary tools and materials, safely de-energizing the circuit, removing the old fixture, installing the new fixture, and restoring power.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

