Remove Existing Light Fixture
From How to Replace a Light Fixture over a Two-Story Stairwell · Step 2 of 4 · Video by Angela Rose | DIY and Design

Showing 0:02–0:04 of the source video. Watch the full video with every moment.
What happens in this clip
Before starting any electrical work, ensure the power to the fixture is turned off at the circuit breaker. Place a ladder or step stool beneath the existing fixture to reach it comfortably. Use a power drill or screwdriver to unscrew the canopy or mounting plate from the ceiling. Once loosened, carefully lower the fixture and disconnect the electrical wires (usually black, white, and bare copper/green) by untwisting wire nuts or loosening terminal screws. Support the fixture while disconnecting to prevent it from falling. Once all wires are disconnected, remove the old fixture entirely, leaving only the electrical box and exposed wires in the ceiling.
Goal: Begin by safely removing the old light fixture from the ceiling. This involves unscrewing the mounting hardware and carefully disconnecting the electrical wires.
What's used
Tools
- Ladder/Step Stool
- Power Drill
- Screwdriver
About the full video
This project guides you through replacing an existing ceiling light fixture with a new 'bubble' style LED chandelier. It covers the safe removal of the old fixture, unpacking and organizing the new chandelier components, installing the new ceiling mounting bracket, connecting electrical wiring, attaching the chandelier base, installing LED bulbs, and carefully assembling and hanging numerous glass globes to complete the fixture.
Step 2 of 4: Remove the Old Light Fixture
With the power confirmed off, remove any decorative globes or covers from the old fixture. Unscrew the mounting screws that hold the fixture's base to the ceiling electrical box. Support the fixture as you disconnect the wires. Typically, you'll find black (hot), white (neutral), and green or bare copper (ground) wires. Unscrew wire nuts or use pliers to gently untwist the wire connections. Ensure the wires do not fall back into the electrical box.
Every video in How to Replace a Light Fixture over a Two-Story Stairwell
Step 1: De-energize the Circuit
- 0:50–1:05 Turn Off Power at Circuit Breaker
- 0:31–0:40 Turn Off Power at Breaker
- 0:03–0:05 Shut Off Power to the Circuit
Step 2: Remove the Old Light Fixture
- 0:10–0:28 Remove The Old Fixture
- 0:22–0:34 Remove Old Light Fixture
- 0:02–0:04 Remove Existing Light Fixture (this video)
Step 3: Install the New Light Fixture
- 2:46–3:50 Connect New Light Fixture Wiring
- 1:30–1:53 Wire and Hang New Fixture
- 4:35–5:33 Install Mounting Bracket and Safety Wire
Step 4: Restore Power and Test
- 5:24–5:39 Restore Power and Test
- 10:35–10:39 Restore Power and Test the New Fixtures
- 0:16–0:25 Restore Power and Final Check
How to Replace a Light Fixture over a Two-Story Stairwell
This project outlines the steps for safely replacing a light fixture in a two-story stairwell. It involves gathering necessary tools and materials, safely de-energizing the circuit, removing the old fixture, installing the new fixture, and restoring power.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

