Visually Inspect for Staircase Wear and Damage
From How to Check Stairs for Rot or Damage Before Covering Them · Step 1 of 5 · Video by stairbuilding

Showing 1:02–1:35 of the source video. Watch the full video with every moment.
What happens in this clip
After understanding the measurement technique, the video shifts to visually examining the staircase for any obvious signs of wear and tear, which are more common in older structures. It points out that the center sections of the treads are most susceptible to abuse from repeated foot traffic over time. Look for chipped or missing nosing (the front edge of the tread), split sections of the wood, or noticeable depressions and unevenness on the tread surfaces. These visual cues often indicate areas where code violations due to excessive variation are most likely to occur.
Goal: Conduct a visual assessment of the staircase to identify obvious signs of wear, such as missing nosing, split sections, or depressions in the treads, which are common in high-traffic areas.
About the full video
This video illustrates how to perform a visual and measurement-based inspection of older staircases to identify wear and tear that could result in building code violations related to riser height and tread depth. It emphasizes the importance of checking for consistency between steps to ensure safety and compliance, particularly for homeowners undertaking remodeling projects. While the requested context was Electrical Code Compliance, this video specifically addresses structural building codes for stairways.
Step 1 of 5: Inspect Treads and Risers for Surface Damage
Begin by thoroughly examining the surface of each stair tread and riser. Look for any visible cracks, deep gouges, splintering wood, or areas where the finish has worn away. Discoloration, especially dark spots or staining, can be an early indicator of moisture intrusion or rot. Focus on the front edge of the treads and the areas where the riser meets the tread, as these are high-traffic zones and prone to damage. Use a bright flashlight to enhance visibility, especially in dimly lit stairwells.
Every video in How to Check Stairs for Rot or Damage Before Covering Them
Step 1: Inspect Treads and Risers for Surface Damage
- 0:00–0:53 Assess Damage & Prepare for Repair
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage (this video)
Step 2: Probe for Soft Spots and Rot
- 3:55–4:18 Inspect for Rot and Soft Spots
- 0:35–0:51 Test Suspected Decayed Areas
- 0:00–0:53 Assess Damage & Prepare for Repair
Step 3: Check Stringer Integrity
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:54–1:40 Identify Stringer Cracks
- 0:05–0:14 Identify and Assess Damage
Step 4: Assess Fastener Security
- 0:00–0:53 Assess Damage & Prepare for Repair
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:12–0:14 Final Test and Inspection
Step 5: Test for Stability and Squeaks
- 0:12–0:14 Final Test and Inspection
- 4:28–5:00 Test the Repaired Stairs
- 3:29–3:39 Eliminate Squeaks from Treads
How to Check Stairs for Rot or Damage Before Covering Them
A high-level outline for a DIY project to inspect stairs for rot or damage before covering them. This involves visual inspection, probing for softness, checking for structural integrity, and assessing the condition of treads, risers, and stringers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

