Test the Repaired Stairs
From How to Check Stairs for Rot or Damage Before Covering Them · Step 5 of 5 · Video by Ultimate Handyman

Showing 4:28–5:00 of the source video. Watch the full video with every moment.
What happens in this clip
With all the reinforcements and adhesive in place, the stairs should now be completely solid and free of squeaks. To test the repair, walk up and down the stairs, specifically listening for any remaining noise. The improved stability and filled gaps will prevent the movement that causes squeaking, allowing for quiet and safe use of the stairs.
Goal: Confirm the elimination of squeaks and stability of the stairs.
About the full video
This project demonstrates a method to eliminate squeaky stairs by reinforcing the treads and risers from underneath. The process involves removing any existing inadequate braces, applying an expanding wood adhesive into gaps, and then screwing solid timber pieces to securely connect the risers and treads, thereby stopping movement and noise.
Step 5 of 5: Test for Stability and Squeaks
After visually and physically inspecting the components, perform a functional test. Walk up and down the stairs at a normal pace, deliberately putting weight on different parts of each step, especially near the edges and center. Listen carefully for any creaking or squeaking sounds. These noises often indicate that treads are rubbing against stringers or that fasteners have loosened. Try to pinpoint the exact location of the noise. Also, pay attention to any noticeable wobble or excessive flex in the stairs as you walk. Significant instability or loud, persistent squeaks warrant further investigation into the cause.
Every video in How to Check Stairs for Rot or Damage Before Covering Them
Step 1: Inspect Treads and Risers for Surface Damage
- 0:00–0:53 Assess Damage & Prepare for Repair
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Probe for Soft Spots and Rot
- 3:55–4:18 Inspect for Rot and Soft Spots
- 0:35–0:51 Test Suspected Decayed Areas
- 0:00–0:53 Assess Damage & Prepare for Repair
Step 3: Check Stringer Integrity
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:54–1:40 Identify Stringer Cracks
- 0:05–0:14 Identify and Assess Damage
Step 4: Assess Fastener Security
- 0:00–0:53 Assess Damage & Prepare for Repair
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:12–0:14 Final Test and Inspection
Step 5: Test for Stability and Squeaks
- 0:12–0:14 Final Test and Inspection
- 4:28–5:00 Test the Repaired Stairs (this video)
- 3:29–3:39 Eliminate Squeaks from Treads
How to Check Stairs for Rot or Damage Before Covering Them
A high-level outline for a DIY project to inspect stairs for rot or damage before covering them. This involves visual inspection, probing for softness, checking for structural integrity, and assessing the condition of treads, risers, and stringers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

