Final Test and Inspection
From How to Check Stairs for Rot or Damage Before Covering Them · Step 4 of 5 · Video by The BC Builder

Showing 0:12–0:14 of the source video. Watch the full video with every moment.
What happens in this clip
Once all structural components, treads, and risers are installed, conduct a thorough final inspection. Walk up and down the completed stairs several times, paying close attention to their feel. Check for any wobbling, squeaking, or unevenness. Ensure all connections are tight and secure. This "final test" confirms the stability, safety, and comfort of the newly built staircase. Any minor adjustments or final cosmetic touches, like sanding or preparing for finish coatings, would be addressed after this evaluation.
Goal: Confirm the stairs are stable, safe, and comfortable
About the full video
This project outlines the process of building a wooden staircase, including cutting stringers, installing them, attaching treads and risers with glue for stability, framing a support wall, and completing a lower flight of stairs. The process emphasizes precision to ensure a solid and comfortable final product.
Step 4 of 5: Assess Fastener Security
Inspect all connection points where treads meet risers and stringers, and where risers meet each other. Look closely at the fasteners used, whether they are screws, nails, or staples. Check if any are protruding, loose, or missing entirely. Gently try to rock or lift treads and risers to feel for play that indicates a failed connection. If you find loose fasteners, tighten them appropriately. Note any areas where wood may have deteriorated around a fastener, suggesting the fastener can no longer hold securely. Examine glue joints for signs of separation.
Every video in How to Check Stairs for Rot or Damage Before Covering Them
Step 1: Inspect Treads and Risers for Surface Damage
- 0:00–0:53 Assess Damage & Prepare for Repair
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Probe for Soft Spots and Rot
- 3:55–4:18 Inspect for Rot and Soft Spots
- 0:35–0:51 Test Suspected Decayed Areas
- 0:00–0:53 Assess Damage & Prepare for Repair
Step 3: Check Stringer Integrity
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:54–1:40 Identify Stringer Cracks
- 0:05–0:14 Identify and Assess Damage
Step 4: Assess Fastener Security
- 0:00–0:53 Assess Damage & Prepare for Repair
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:12–0:14 Final Test and Inspection (this video)
Step 5: Test for Stability and Squeaks
- 0:12–0:14 Final Test and Inspection
- 4:28–5:00 Test the Repaired Stairs
- 3:29–3:39 Eliminate Squeaks from Treads
How to Check Stairs for Rot or Damage Before Covering Them
A high-level outline for a DIY project to inspect stairs for rot or damage before covering them. This involves visual inspection, probing for softness, checking for structural integrity, and assessing the condition of treads, risers, and stringers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

