Prioritize Maintenance and Safety
From How to Check Stairs for Rot or Damage Before Covering Them · Step 4 of 5 · Video by gregvancom

Showing 3:26–4:07 of the source video. Watch the full video with every moment.
What happens in this clip
Regularly inspect and maintain your stairway, especially its structural components. Check for signs of insect damage, rot, or loosening fasteners. Address any issues promptly. Prioritizing the structural integrity of your stairway components, including posts and stringers, will minimize the risk of accidents and reduce the likelihood of costly repairs in the future. Remember that one weak structural component can compromise the entire structure's integrity.
Goal: Ensure long-term safety and minimize future repair costs through regular maintenance.
What's used
Tools
- Flashlight
- Pry Bar
Materials
- Wood Preservative/Sealant
- Stain
About the full video
This project provides instructions on how to ensure structural integrity when building or maintaining a stairway landing and guardrail. It highlights the dangers of using undersized lumber, such as a single 2x4, for critical support elements and recommends using appropriately sized materials, like 4x4 posts, to prevent structural failure, termite damage, and ensure long-term safety.
Step 4 of 5: Assess Fastener Security
Inspect all connection points where treads meet risers and stringers, and where risers meet each other. Look closely at the fasteners used, whether they are screws, nails, or staples. Check if any are protruding, loose, or missing entirely. Gently try to rock or lift treads and risers to feel for play that indicates a failed connection. If you find loose fasteners, tighten them appropriately. Note any areas where wood may have deteriorated around a fastener, suggesting the fastener can no longer hold securely. Examine glue joints for signs of separation.
Every video in How to Check Stairs for Rot or Damage Before Covering Them
Step 1: Inspect Treads and Risers for Surface Damage
- 0:00–0:53 Assess Damage & Prepare for Repair
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Probe for Soft Spots and Rot
- 3:55–4:18 Inspect for Rot and Soft Spots
- 0:35–0:51 Test Suspected Decayed Areas
- 0:00–0:53 Assess Damage & Prepare for Repair
Step 3: Check Stringer Integrity
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:54–1:40 Identify Stringer Cracks
- 0:05–0:14 Identify and Assess Damage
Step 4: Assess Fastener Security
- 0:00–0:53 Assess Damage & Prepare for Repair
- 3:26–4:07 Prioritize Maintenance and Safety (this video)
- 0:12–0:14 Final Test and Inspection
Step 5: Test for Stability and Squeaks
- 0:12–0:14 Final Test and Inspection
- 4:28–5:00 Test the Repaired Stairs
- 3:29–3:39 Eliminate Squeaks from Treads
How to Check Stairs for Rot or Damage Before Covering Them
A high-level outline for a DIY project to inspect stairs for rot or damage before covering them. This involves visual inspection, probing for softness, checking for structural integrity, and assessing the condition of treads, risers, and stringers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

