Assess Damage & Prepare for Repair
From How to Check Stairs for Rot or Damage Before Covering Them · Step 1 of 5 · Video by gregvancom

Showing 0:00–0:53 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by thoroughly inspecting the exterior stair structure. Identify any treads or risers that are loose, cracked, splintered, or show signs of rot. Note how the treads and risers are currently attached to the stringers (e.g., using wedges, nails, or other fasteners). The video highlights that original wedges often loosen, fall out, or become damaged, leading to instability. Determine if a full tread replacement is necessary, or if reinforcement of existing, salvable treads/risers is sufficient.
Goal: Examine the existing stair structure to identify loose, rotted, or damaged treads, risers, and stringers. Understand the current fastening method and prepare the area for replacement or reinforcement.
What's used
Tools
- Pry Bar
- Safety Gloves
About the full video
This guide provides various methods for repairing and reinforcing exterior stair treads, focusing on replacing damaged components with durable pressure-treated lumber. It covers techniques for reinforcing tread and riser connections, adding structural support, and using threaded rods to tighten the entire assembly, ensuring longevity and resistance to moisture and decay.
Step 1 of 5: Inspect Treads and Risers for Surface Damage
Begin by thoroughly examining the surface of each stair tread and riser. Look for any visible cracks, deep gouges, splintering wood, or areas where the finish has worn away. Discoloration, especially dark spots or staining, can be an early indicator of moisture intrusion or rot. Focus on the front edge of the treads and the areas where the riser meets the tread, as these are high-traffic zones and prone to damage. Use a bright flashlight to enhance visibility, especially in dimly lit stairwells.
Every video in How to Check Stairs for Rot or Damage Before Covering Them
Step 1: Inspect Treads and Risers for Surface Damage
- 0:00–0:53 Assess Damage & Prepare for Repair (this video)
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Probe for Soft Spots and Rot
- 3:55–4:18 Inspect for Rot and Soft Spots
- 0:35–0:51 Test Suspected Decayed Areas
- 0:00–0:53 Assess Damage & Prepare for Repair
Step 3: Check Stringer Integrity
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:54–1:40 Identify Stringer Cracks
- 0:05–0:14 Identify and Assess Damage
Step 4: Assess Fastener Security
- 0:00–0:53 Assess Damage & Prepare for Repair
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:12–0:14 Final Test and Inspection
Step 5: Test for Stability and Squeaks
- 0:12–0:14 Final Test and Inspection
- 4:28–5:00 Test the Repaired Stairs
- 3:29–3:39 Eliminate Squeaks from Treads
How to Check Stairs for Rot or Damage Before Covering Them
A high-level outline for a DIY project to inspect stairs for rot or damage before covering them. This involves visual inspection, probing for softness, checking for structural integrity, and assessing the condition of treads, risers, and stringers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

