Identify Stringer Cracks
From How to Check Stairs for Rot or Damage Before Covering Them · Step 3 of 5 · Video by gregvancom

Showing 0:54–1:40 of the source video. Watch the full video with every moment.
What happens in this clip
The video highlights the most significant problem observed in such staircases: cracking stringers. An arrow points to a specific stringer where a large crack is visible, extending almost completely through the wood at the intersection of a step and riser. This type of crack is a critical structural concern, distinct from general warping or twisting of handrails and treads.
Goal: Recognize and understand the significance of cracks in stair stringers.
About the full video
This video provides an analysis of an unmaintained exterior wooden staircase, emphasizing the critical importance of regular treatment and upkeep to prevent structural degradation. It specifically highlights the dangers posed by cracked stringers, explaining how such damage compromises safety and significantly reduces the lifespan of the staircase. The content serves as a cautionary guide rather than a step-by-step construction project.
Step 3 of 5: Check Stringer Integrity
Locate the stair stringers, which are the diagonal boards that support the treads and risers. These are typically visible from the sides of the staircase. Visually inspect the entire length of each stringer for any longitudinal cracks, splits, or evidence of rot, particularly at the top and bottom where they connect to the structure. Gently try to wiggle the stringers; they should feel solid and securely fastened. If possible and safe to do so, apply some downward pressure to the treads near the stringers to check for any visible sagging or excessive flex in the stringers themselves. Ensure the stringers are firmly attached to the upper and lower framing members.
Every video in How to Check Stairs for Rot or Damage Before Covering Them
Step 1: Inspect Treads and Risers for Surface Damage
- 0:00–0:53 Assess Damage & Prepare for Repair
- 1:02–1:35 Visually Inspect for Staircase Wear and Damage
Step 2: Probe for Soft Spots and Rot
- 3:55–4:18 Inspect for Rot and Soft Spots
- 0:35–0:51 Test Suspected Decayed Areas
- 0:00–0:53 Assess Damage & Prepare for Repair
Step 3: Check Stringer Integrity
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:54–1:40 Identify Stringer Cracks (this video)
- 0:05–0:14 Identify and Assess Damage
Step 4: Assess Fastener Security
- 0:00–0:53 Assess Damage & Prepare for Repair
- 3:26–4:07 Prioritize Maintenance and Safety
- 0:12–0:14 Final Test and Inspection
Step 5: Test for Stability and Squeaks
- 0:12–0:14 Final Test and Inspection
- 4:28–5:00 Test the Repaired Stairs
- 3:29–3:39 Eliminate Squeaks from Treads
How to Check Stairs for Rot or Damage Before Covering Them
A high-level outline for a DIY project to inspect stairs for rot or damage before covering them. This involves visual inspection, probing for softness, checking for structural integrity, and assessing the condition of treads, risers, and stringers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

