Understand Anti-Slip Standards and Product

What happens in this clip

The presenter introduces the product, BuildRite StopSlip Tiles, an anti-slip coating designed to prevent slips on tile surfaces. He explains that according to the Americans with Disabilities Act (ADA) standard, a non-slip surface should have a minimum coefficient of friction of 0.6 when dry and 0.5 when wet. This step provides the context and objective for using the anti-slip coating.

About the full video

This video demonstrates the benefits and application of BuildRite StopSlip Tiles, an anti-slip coating for tiles. It shows testing of the product's effectiveness in increasing friction on both dry and wet surfaces, followed by a brief demonstration of how to mix and apply the product using a textured roller to prevent slips.

Step 2 of 9: Determine Application Environment and Use

Consider where the anti-slip solution will be applied and how it will be used. Will it be exposed to direct sunlight, rain, snow, or extreme temperatures? Is it an indoor or outdoor application? What kind of substances might spill on it (e.g., grease, oil, cleaning chemicals)? What kind of traffic will it endure, and how heavy or frequent will it be? Understanding these factors is crucial for selecting a durable and effective solution.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product (this video)
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure