Allow Curing & Access Product Information

What happens in this clip

After the application is complete, allow the epoxy coating to cure fully. It is important to understand that the cure times for Ultra Grip will vary significantly depending on external factors such as the ambient temperature, the specific temperature of the surface, and the type of substrate the coating was applied to. SlipDoctors Ultra Grip is available in a variety of colors and offers different hardener options to meet specific aesthetic and performance requirements. For comprehensive technical specifications, detailed application instructions, and safety information, it is recommended to scan the provided QR code to download the Technical Data Sheet. Once fully cured, your new anti-slip surface by SlipDoctors will be ready for use.

Goal: Ensure the epoxy coating fully cures and access additional product and safety details.

What's used

Tools

• QR Code Reader (Smartphone/Tablet)

About the full video

This project provides step-by-step instructions for applying SlipDoctors Ultra Grip, a two-component heavy-duty anti-slip epoxy coating. The process involves ensuring safety, thoroughly mixing the epoxy components, and then applying the coating to a floor surface using a roller or squeegee to achieve enhanced durability, chemical resistance, and safety in areas like garages, warehouses, or marine environments.

Step 9 of 9: Cure and Inspect

After installation, let the anti-slip solution cure completely. This period is critical for the adhesive or coating to reach its maximum strength and durability. Once cured, inspect the entire treated area. Check for any signs of peeling, lifting, or bubbling. Test the traction by carefully walking across the surface. Ensure it feels secure and provides the intended level of slip resistance.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information (this video)
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure