Apply Anti-Skid Paint

What happens in this clip

Once you have read the instructions and completed any necessary surface preparation (such as cleaning and drying the area), proceed to apply the Dura Grip anti-skid paint. The video demonstrates applying the paint using a roller, which helps achieve an even, textured finish. Ensure consistent coverage across the entire hazardous surface. This anti-slip epoxy is designed to adhere well to a variety of materials including metal, fiberglass, concrete, or wood.

Goal: Cover the identified slippery surface with anti-skid paint

What's used

Tools

• Dura Grip Anti-Slip Epoxy Paint Slip Doctors
• Roller
• Specialized applicator

About the full video

This project guides you through the process of applying Dura Grip anti-slip epoxy paint to various surfaces. Designed as an easy DIY solution, the product creates a textured finish that significantly reduces slip and fall accidents on wet or slippery floors, offering durable and comfortable slip resistance for years for both indoor and outdoor environments.

Step 8 of 9: Apply Anti-Slip Coating (if selected)

If an anti-slip coating was selected, carefully follow the manufacturer's mixing instructions. Apply the coating evenly using a roller, brush, or squeegee, depending on the product type. Ensure consistent coverage across the entire surface. Pay attention to the recommended drying and curing times, and avoid walking on the surface until it is fully hardened to prevent damage and ensure maximum durability.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint (this video)

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure