Prepare Stair Surface

What happens in this clip

Before applying the anti-slip strip, it is crucial to ensure the stair surface is clean, dry, and free of any dust, dirt, or grease. Use a cleaning cloth and a mild cleaner to thoroughly wipe down the area where the strip will be applied. Allow the surface to dry completely to ensure optimal adhesion of the self-adhesive strip.

Goal: Clean and prepare stair edges for anti-slip strip application

What's used

Tools

• Cleaning cloth
• Sponge

Materials

• Mild cleaner
• Soap and water solution

About the full video

This project demonstrates the simple process of installing anti-slip "staircase guards" to prevent slips and falls on stairs. It involves preparing the stair surface, applying self-adhesive strips to the edge of each step, and trimming them to fit, significantly enhancing stair safety.

Step 5 of 9: Prepare Surface for Selected Solution

Follow the manufacturer's instructions for the selected anti-slip product. For most applications, this involves thoroughly cleaning the surface to remove dirt, grease, and debris. If applying tape or treads, the surface must be completely dry. For coatings, you might need to degrease, acid etch (for concrete), or sand the surface to ensure proper adhesion. Priming may be necessary for certain materials or coatings. For example, if applying grip tape to a painted surface, ensure the paint is sound and clean; if the paint is peeling, it must be removed and the surface treated accordingly.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface (this video)

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure