Apply Tuff Grip Anti-Slip Coating

What happens in this clip

With the surface clean and dry, apply the Tuff Grip solution using a paint roller. Ensure an even and aggressive coating to achieve the desired textured anti-slip finish. Be mindful that the coverage will vary depending on the porous quality of the surface and how thickly you apply the solution.

Goal: Apply an even, aggressive coating for textured finish

What's used

Tools

• Eye Protection
• Paint Roller
• Texture roller
• Safety Gloves

Materials

• Tuff Grip Solution Slip Doctors

About the full video

This DIY project demonstrates how to apply Tuff Grip high-performance anti-slip coating to various indoor and outdoor surfaces. The process involves thorough surface preparation, careful application of the textured coating using a paint roller, and a drying period to achieve a durable, slip-resistant finish.

Step 8 of 9: Apply Anti-Slip Coating (if selected)

If an anti-slip coating was selected, carefully follow the manufacturer's mixing instructions. Apply the coating evenly using a roller, brush, or squeegee, depending on the product type. Ensure consistent coverage across the entire surface. Pay attention to the recommended drying and curing times, and avoid walking on the surface until it is fully hardened to prevent damage and ensure maximum durability.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating (this video)
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure