Apply Adhesive-Backed Anti-Slip Products

What happens in this clip

Once the surface is prepared and the material is sized, carefully apply the adhesive-backed anti-slip products. For items like the 'Casa Pura Bullnose' rubber treads or 'SlipDoctors Tape', which feature adhesive backing, simply peel off the protective layer and firmly press the material onto the clean, dry surface. Apply even pressure across the entire surface to ensure full contact and eliminate any trapped air bubbles, enhancing the bond's strength. Note that products with rounded corners, such as 'Slip Guard Safety' strips, are designed to help reduce peeling over time.

Goal: Securely attach adhesive-backed anti-slip materials to the prepared surface.

About the full video

This guide compiles information from a product review video to offer generalized steps for selecting and installing various outdoor anti-slip stair treads and tapes that predominantly utilize adhesive bonding or are made of rubberized materials. While the video primarily showcases different commercial products, these instructions extrapolate best practices for surface preparation, customization, and application of such materials for enhanced safety on stairs and walkways, adhering to the context of rubber walkway installation with adhesive bond.

Step 1 of 9: Assess Surface Type and Condition

Examine the target surface thoroughly. Identify its composition (e.g., wood, concrete, tile, metal, plastic). Assess its existing texture and porosity. Check for any existing coatings, sealants, or damage like cracks, gouges, or unevenness. Note whether the surface is typically exposed to moisture, oils, or heavy foot traffic, as these factors influence the best traction option.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products (this video)

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure