Install Carpet Treads with Adhesive

What happens in this clip

Take a carpet tread from its box. The easiest and most rewarding part is installation. First, peel off the protective backing from the adhesive strip on the back of the tread. Position the carpet tread by hooking its bullnose (the front edge) underneath the bottom edge of the stair tread. Then, gently pull back on the tread with one hand to ensure it's nice and tight against the bullnose. Once taut, press firmly across the entire surface of the tread, ensuring it adheres securely. Use the painter's tape as a guide to maintain perfect alignment, ensuring everything is straight.

Goal: Peel off the protective backing from the carpet tread, hook it under the bullnose of the stair, and then firmly press and align it using the painter's tape guide.

What's used

Tools

• Carpet treads

About the full video

This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.

Step 6 of 9: Install Carpet Treads (if selected)

If carpet treads were chosen, measure and cut each tread to fit the width of the stair or surface. Most carpet treads have a self-adhesive backing. Carefully peel off the backing and position the tread on the prepared surface, pressing down firmly from the center outwards to ensure full contact and eliminate air bubbles. Overlap slightly at the edge of each step if necessary for coverage.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive (this video)
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure