Spray Clear Anti-Slip Coating

What happens in this clip

As another solution, or in addition to abrasive strips, apply an anti-slip or slip-resistant coating to your steps. The video highlights a clear, spray-on coating that is applied directly to the step treads after they have been thoroughly cleaned and dried. This type of coating creates a transparent, textured surface that significantly increases friction without altering the appearance of the wood. Spray the coating evenly across the treads, following the manufacturer's instructions for application distance and drying time.

Goal: Create a transparent, slip-resistant surface

What's used

Materials

• Anti-Slip/Slip-Resistant Coating Rust-Oleum Epoxy Shield Anti-Slip (partially visible)
• Non-slip additive for sealers
• slip-resistant surface on step treads.

About the full video

This project outlines several methods to enhance the safety of outdoor wooden steps, decks, or walkways by making them less slippery. It covers cleaning the wood, applying peel-and-stick abrasive strips, and using a clear, spray-on anti-slip coating to prevent slips and falls.

Step 3 of 9: Compare Anti-Slip Solution Options

Investigate the pros and cons of each type of anti-slip solution. Carpet treads offer a softer feel and can be good for indoor stairs but may not be durable outdoors. Grip tape provides aggressive traction but can wear down quickly and may be difficult to clean. Coatings offer a seamless, durable finish and can be customized for different levels of grip and aesthetics, but often require more preparation and drying time. Consider factors like ease of installation, maintenance, cost, and aesthetic impact for each option.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating (this video)

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure