Apply Peel-and-Stick Carpet Treads

What happens in this clip

With the guide lines in place, take each carpet stair tread, peel off its protective backing to reveal the adhesive, and carefully position it onto the stair, aligning it precisely with the blue painter's tape guides. Press down firmly across the entire surface of the tread to ensure strong adhesion. Repeat this process for all stairs.

Goal: Securely attach carpet treads to each stair

What's used

Materials

• Oak Valley Designs Carpet Stair Treads Oak Valley Designs

About the full video

This project involves installing peel-and-stick carpet stair treads on wooden stairs to improve safety, comfort, and aesthetics. The process includes unboxing the treads, measuring and marking the stairs for consistent placement, and then applying each tread.

Step 6 of 9: Install Carpet Treads (if selected)

If carpet treads were chosen, measure and cut each tread to fit the width of the stair or surface. Most carpet treads have a self-adhesive backing. Carefully peel off the backing and position the tread on the prepared surface, pressing down firmly from the center outwards to ensure full contact and eliminate air bubbles. Overlap slightly at the edge of each step if necessary for coverage.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads (this video)
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure