Shape and Finish the Mortar
From How to Fix a Crumbling Concrete Step Corner · Step 5 of 6 · Video by Mike Haduck Masonry

Showing 7:09–8:52 of the source video. Watch the full video with every moment.
What happens in this clip
After applying the mortar, the presenter uses a trowel to roughly smooth the surface, ensuring it is level and flush with the surrounding concrete. He then uses a concrete edger, running it along the top and bottom edges of the newly patched area to create a clean, rounded profile. Following this, a wet sponge is used to gently rub the surface, further smoothing it, removing any minor imperfections or trowel marks, and creating a more uniform appearance. This sponge finishing helps to consolidate the surface and bring fine particles to the top.
Goal: The applied mortar is initially smoothed with a trowel, then edged to create clean lines, and finally smoothed with a sponge to refine the surface and blend it.
What's used
Tools
- Concrete Edger
- Sponge
- Trowel
Materials
- Water
About the full video
This video details the process of repairing a damaged concrete porch step using polymer-modified mortar. It covers surface preparation, including grinding and cleaning, setting up forms, applying the fast-setting mortar, smoothing, and edging, followed by addressing any imperfections and optional final grinding for a seamless finish.
Step 5 of 6: Shape and Finish the Repair
As the repair material begins to set, use a finishing trowel to strike off any excess material and to create a smooth, level surface that matches the surrounding concrete. Pay close attention to the edges and corners to create a seamless appearance. If necessary, use a damp sponge or a concrete float to further refine the texture and achieve a consistent finish. The goal is to make the repair as invisible as possible.
Every video in How to Fix a Crumbling Concrete Step Corner
Step 1: Clean the Damaged Area
- 1:36–3:50 Clean Out Loose Concrete and Debris
- 0:58–1:49 Clean Surface with Wire Brush and Broom
- 0:33–1:10 Prepare Damaged Concrete Surface
Step 2: Undercut Edges for Better Adhesion
- 0:30–0:45 Prepare Damaged Area
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
- 0:27–0:56 Remove Unsound Concrete
Step 3: Mix Concrete Repair Material
- 3:49–4:29 Mix the Fast-Setting Repair Mortar
- 0:32–0:40 Mix Concrete Repair Material
- 1:32–2:17 Mix the Quick-Setting Cement
Step 4: Apply Concrete Repair Material
- 0:49–1:16 Fill and Shape with Patching Cement
- 3:43–4:30 Apply and Smooth Cement
- 2:32–3:19 Apply and Rough Shape Cement
Step 5: Shape and Finish the Repair
- 1:16–1:29 Finish and Blend the Surface
- 7:09–8:52 Shape and Finish the Mortar (this video)
- 3:19–4:06 Finish with Sponge Float
Step 6: Cure the Repaired Area
- 5:21–5:39 Water Cure Repaired Concrete Steps
- 2:52–3:01 Cure the Repaired Concrete
- 2:32–2:45 Cure Cementitious Repairs
How to Fix a Crumbling Concrete Step Corner
This project outlines the steps to repair a crumbling concrete step corner, involving cleaning, repairing, and resurfacing the damaged area to restore its structural integrity and appearance.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

