Clean Surface with Wire Brush and Broom
From How to Fix a Crumbling Concrete Step Corner · Step 1 of 6 · Video by Kirk Giordano plastering Inc.

Showing 0:58–1:49 of the source video. Watch the full video with every moment.
What happens in this clip
After removing all large loose pieces, use a wire brush to vigorously scrub the remaining concrete surface in the repair area. This action removes any lingering dust, fine particles, or minor debris that could prevent proper adhesion of the new cement. Follow this by sweeping the area thoroughly with a hand broom to clear away all dislodged material.
Goal: Ensure the concrete surface is clean and free of debris for proper adhesion.
What's used
Tools
- Hand broom
- Dustpan and brush
- Safety Glasses
- Wire brush
- Angle grinder with wire brush attachment (for larger areas)
About the full video
This project demonstrates a quick and effective method to repair cracked and crumbling concrete on steps or pathways. The process involves removing loose and damaged concrete, thoroughly cleaning the repair area, mixing fresh cement with an accelerating additive to speed up curing, and applying it to reshape the damaged section, finishing with a sponge float for a smooth and blended appearance.
Step 1 of 6: Clean the Damaged Area
Using a stiff wire brush, scrub the damaged concrete area vigorously. Rinse the area thoroughly with water to wash away all loose particles and dust. If there is any white, powdery substance (efflorescence) on the concrete, ensure it is completely removed as it can prevent proper adhesion of the repair material. Allow the area to dry slightly; it should be damp but not wet.
Every video in How to Fix a Crumbling Concrete Step Corner
Step 1: Clean the Damaged Area
- 1:36–3:50 Clean Out Loose Concrete and Debris
- 0:58–1:49 Clean Surface with Wire Brush and Broom (this video)
- 0:33–1:10 Prepare Damaged Concrete Surface
Step 2: Undercut Edges for Better Adhesion
- 0:30–0:45 Prepare Damaged Area
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
- 0:27–0:56 Remove Unsound Concrete
Step 3: Mix Concrete Repair Material
- 3:49–4:29 Mix the Fast-Setting Repair Mortar
- 0:32–0:40 Mix Concrete Repair Material
- 1:32–2:17 Mix the Quick-Setting Cement
Step 4: Apply Concrete Repair Material
- 0:49–1:16 Fill and Shape with Patching Cement
- 3:43–4:30 Apply and Smooth Cement
- 2:32–3:19 Apply and Rough Shape Cement
Step 5: Shape and Finish the Repair
- 1:16–1:29 Finish and Blend the Surface
- 7:09–8:52 Shape and Finish the Mortar
- 3:19–4:06 Finish with Sponge Float
Step 6: Cure the Repaired Area
- 5:21–5:39 Water Cure Repaired Concrete Steps
- 2:52–3:01 Cure the Repaired Concrete
- 2:32–2:45 Cure Cementitious Repairs
How to Fix a Crumbling Concrete Step Corner
This project outlines the steps to repair a crumbling concrete step corner, involving cleaning, repairing, and resurfacing the damaged area to restore its structural integrity and appearance.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

