Mix Concrete Repair Material
From How to Fix a Crumbling Concrete Step Corner · Step 3 of 6 · Video by Sakrete

Showing 0:32–0:40 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by preparing the concrete repair mix. Combine the Sakrete Pro-Mix Concrete Repair powder with water at a 4:1 ratio (four parts powder to one part water). Mix thoroughly until the material achieves a clay-like consistency, which the demonstrator describes as a "glistening snowball." This consistency is crucial for easy molding and proper application.
Goal: Prepare the concrete repair mix to the correct, moldable consistency.
What's used
Tools
- Measuring Containers
- Mixing Container
- Wheelbarrow
- Mixing Tool
- Drill mixer with paddle
Materials
- Sakrete Pro-Mix Concrete Repair (Powder) Sakrete
- Water
About the full video
This project demonstrates how to repair a damaged concrete support column with exposed rebar using Sakrete Pro-Mix Concrete Repair. The process involves mixing the product to the correct consistency, applying it in multiple layers to ensure a strong bond, and finishing the surface to match the existing concrete for a seamless aesthetic.
Step 3 of 6: Mix Concrete Repair Material
Read the instructions on the concrete repair product packaging carefully. In a clean mixing container, add the specified amount of water or bonding agent, then gradually add the dry repair material. Mix thoroughly with a trowel or mixing paddle until a uniform, lump-free consistency is achieved. The mixture should be firm enough to hold its shape but soft enough to be spreadable and workable. Avoid over-mixing or mixing too much material at once, as it can begin to harden.
Every video in How to Fix a Crumbling Concrete Step Corner
Step 1: Clean the Damaged Area
- 1:36–3:50 Clean Out Loose Concrete and Debris
- 0:58–1:49 Clean Surface with Wire Brush and Broom
- 0:33–1:10 Prepare Damaged Concrete Surface
Step 2: Undercut Edges for Better Adhesion
- 0:30–0:45 Prepare Damaged Area
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
- 0:27–0:56 Remove Unsound Concrete
Step 3: Mix Concrete Repair Material
- 3:49–4:29 Mix the Fast-Setting Repair Mortar
- 0:32–0:40 Mix Concrete Repair Material (this video)
- 1:32–2:17 Mix the Quick-Setting Cement
Step 4: Apply Concrete Repair Material
- 0:49–1:16 Fill and Shape with Patching Cement
- 3:43–4:30 Apply and Smooth Cement
- 2:32–3:19 Apply and Rough Shape Cement
Step 5: Shape and Finish the Repair
- 1:16–1:29 Finish and Blend the Surface
- 7:09–8:52 Shape and Finish the Mortar
- 3:19–4:06 Finish with Sponge Float
Step 6: Cure the Repaired Area
- 5:21–5:39 Water Cure Repaired Concrete Steps
- 2:52–3:01 Cure the Repaired Concrete
- 2:32–2:45 Cure Cementitious Repairs
How to Fix a Crumbling Concrete Step Corner
This project outlines the steps to repair a crumbling concrete step corner, involving cleaning, repairing, and resurfacing the damaged area to restore its structural integrity and appearance.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

