Clean Out Loose Concrete and Debris
From How to Fix a Crumbling Concrete Step Corner · Step 1 of 6 · Video by The Fixer

Showing 1:36–3:50 of the source video. Watch the full video with every moment.
What happens in this clip
The first step in the repair process is to thoroughly clean out all loose and unstable concrete from the damaged areas. Use a hammer and a cold chisel (ensure it's not a wood chisel) to chip away any pieces that are not firmly attached. Remove all sand, small fragments, and debris, ensuring that any remaining concrete is solid enough to bond with the new material. A wire brush can help remove smaller loose particles and dust.
Goal: Remove unstable concrete and prepare a clean, solid base for repair
What's used
Tools
- Cold Chisel
- Dustpan and Brush
- Leaf blower
- Hammer
- Wire Brush
About the full video
This project guides you through repairing damaged concrete stairs, focusing on crumbling edges and corners. It involves removing loose debris, reinforcing the structure with concrete screws, applying a bonding adhesive, and then patching the area with quick-setting cement that can be molded and shaped.
Step 1 of 6: Clean the Damaged Area
Using a stiff wire brush, scrub the damaged concrete area vigorously. Rinse the area thoroughly with water to wash away all loose particles and dust. If there is any white, powdery substance (efflorescence) on the concrete, ensure it is completely removed as it can prevent proper adhesion of the repair material. Allow the area to dry slightly; it should be damp but not wet.
Every video in How to Fix a Crumbling Concrete Step Corner
Step 1: Clean the Damaged Area
- 1:36–3:50 Clean Out Loose Concrete and Debris (this video)
- 0:58–1:49 Clean Surface with Wire Brush and Broom
- 0:33–1:10 Prepare Damaged Concrete Surface
Step 2: Undercut Edges for Better Adhesion
- 0:30–0:45 Prepare Damaged Area
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
- 0:27–0:56 Remove Unsound Concrete
Step 3: Mix Concrete Repair Material
- 3:49–4:29 Mix the Fast-Setting Repair Mortar
- 0:32–0:40 Mix Concrete Repair Material
- 1:32–2:17 Mix the Quick-Setting Cement
Step 4: Apply Concrete Repair Material
- 0:49–1:16 Fill and Shape with Patching Cement
- 3:43–4:30 Apply and Smooth Cement
- 2:32–3:19 Apply and Rough Shape Cement
Step 5: Shape and Finish the Repair
- 1:16–1:29 Finish and Blend the Surface
- 7:09–8:52 Shape and Finish the Mortar
- 3:19–4:06 Finish with Sponge Float
Step 6: Cure the Repaired Area
- 5:21–5:39 Water Cure Repaired Concrete Steps
- 2:52–3:01 Cure the Repaired Concrete
- 2:32–2:45 Cure Cementitious Repairs
How to Fix a Crumbling Concrete Step Corner
This project outlines the steps to repair a crumbling concrete step corner, involving cleaning, repairing, and resurfacing the damaged area to restore its structural integrity and appearance.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

