Cure the Repaired Concrete
From How to Fix a Crumbling Concrete Step Corner · Step 6 of 6 · Video by QUIKRETE

Showing 2:52–3:01 of the source video. Watch the full video with every moment.
What happens in this clip
Under normal environmental conditions, no special curing is required for the repaired concrete. However, if the ambient temperatures are consistently over 90 degrees Fahrenheit, it is advisable to keep the patched area damp for 24 to 48 hours. This can be achieved by applying a fine water mist to the repair periodically. This helps prevent rapid drying and ensures optimal strength development.
Goal: Ensure proper curing of the concrete patch
What's used
Tools
- Spray Bottle
- Water
About the full video
This project provides step-by-step instructions for repairing broken concrete edges and corners using a fast-setting repair material and an acrylic fortifier. The process covers essential surface preparation, proper mixing techniques, and precise application and sculpting of the repair material to ensure a durable and permanent fix without the need for traditional forms.
Step 6 of 6: Cure the Repaired Area
Proper curing is critical for the longevity of the repair. Keep the repaired area continuously moist for the duration specified by the repair material manufacturer. This can be achieved by misting the surface with water several times a day, covering it with damp burlap or plastic sheeting, or using a curing compound. Protect the repaired area from direct sunlight, wind, and freezing temperatures during the curing process.
Every video in How to Fix a Crumbling Concrete Step Corner
Step 1: Clean the Damaged Area
- 1:36–3:50 Clean Out Loose Concrete and Debris
- 0:58–1:49 Clean Surface with Wire Brush and Broom
- 0:33–1:10 Prepare Damaged Concrete Surface
Step 2: Undercut Edges for Better Adhesion
- 0:30–0:45 Prepare Damaged Area
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
- 0:27–0:56 Remove Unsound Concrete
Step 3: Mix Concrete Repair Material
- 3:49–4:29 Mix the Fast-Setting Repair Mortar
- 0:32–0:40 Mix Concrete Repair Material
- 1:32–2:17 Mix the Quick-Setting Cement
Step 4: Apply Concrete Repair Material
- 0:49–1:16 Fill and Shape with Patching Cement
- 3:43–4:30 Apply and Smooth Cement
- 2:32–3:19 Apply and Rough Shape Cement
Step 5: Shape and Finish the Repair
- 1:16–1:29 Finish and Blend the Surface
- 7:09–8:52 Shape and Finish the Mortar
- 3:19–4:06 Finish with Sponge Float
Step 6: Cure the Repaired Area
- 5:21–5:39 Water Cure Repaired Concrete Steps
- 2:52–3:01 Cure the Repaired Concrete (this video)
- 2:32–2:45 Cure Cementitious Repairs
How to Fix a Crumbling Concrete Step Corner
This project outlines the steps to repair a crumbling concrete step corner, involving cleaning, repairing, and resurfacing the damaged area to restore its structural integrity and appearance.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

