Apply and Rough Shape Cement
From How to Fix a Crumbling Concrete Step Corner · Step 4 of 6 · Video by Kirk Giordano plastering Inc.

Showing 2:32–3:19 of the source video. Watch the full video with every moment.
What happens in this clip
Using the trowel, scoop generous amounts of the prepared cement mixture from the bucket and apply it directly onto the cleaned and prepared repair area. Work the cement firmly into the void, ensuring it makes good contact with the existing concrete. Use the trowel to roughly shape and build up the new concrete, re-establishing the original contours of the step or pathway. Smooth the surface as much as possible at this stage to minimize later finishing work.
Goal: Fill the damaged area with new cement and establish the basic shape.
What's used
Tools
- Trowel
- Pointing trowel
- applying
- and rough shaping the cement.
Materials
- Prepared cement mixture
About the full video
This project demonstrates a quick and effective method to repair cracked and crumbling concrete on steps or pathways. The process involves removing loose and damaged concrete, thoroughly cleaning the repair area, mixing fresh cement with an accelerating additive to speed up curing, and applying it to reshape the damaged section, finishing with a sponge float for a smooth and blended appearance.
Step 4 of 6: Apply Concrete Repair Material
Using a trowel or putty knife, scoop a generous amount of the mixed repair material. Forcefully press the material into the undercut edges and the deepest parts of the damaged area. Work from the bottom up, filling the void completely. Overfill slightly so that material can be struck off flush with the existing concrete surface. Use the trowel to smooth and level the repair material, matching the existing profile of the step as closely as possible.
Every video in How to Fix a Crumbling Concrete Step Corner
Step 1: Clean the Damaged Area
- 1:36–3:50 Clean Out Loose Concrete and Debris
- 0:58–1:49 Clean Surface with Wire Brush and Broom
- 0:33–1:10 Prepare Damaged Concrete Surface
Step 2: Undercut Edges for Better Adhesion
- 0:30–0:45 Prepare Damaged Area
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
- 0:27–0:56 Remove Unsound Concrete
Step 3: Mix Concrete Repair Material
- 3:49–4:29 Mix the Fast-Setting Repair Mortar
- 0:32–0:40 Mix Concrete Repair Material
- 1:32–2:17 Mix the Quick-Setting Cement
Step 4: Apply Concrete Repair Material
- 0:49–1:16 Fill and Shape with Patching Cement
- 3:43–4:30 Apply and Smooth Cement
- 2:32–3:19 Apply and Rough Shape Cement (this video)
Step 5: Shape and Finish the Repair
- 1:16–1:29 Finish and Blend the Surface
- 7:09–8:52 Shape and Finish the Mortar
- 3:19–4:06 Finish with Sponge Float
Step 6: Cure the Repaired Area
- 5:21–5:39 Water Cure Repaired Concrete Steps
- 2:52–3:01 Cure the Repaired Concrete
- 2:32–2:45 Cure Cementitious Repairs
How to Fix a Crumbling Concrete Step Corner
This project outlines the steps to repair a crumbling concrete step corner, involving cleaning, repairing, and resurfacing the damaged area to restore its structural integrity and appearance.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

