Remove Unsound Concrete
From How to Fix a Crumbling Concrete Step Corner · Step 2 of 6 · Video by QUIKRETE

Showing 0:27–0:56 of the source video. Watch the full video with every moment.
What happens in this clip
The first critical step in achieving a successful concrete repair is thorough surface preparation. You must remove any unsound or flaking concrete from the damaged area. This can be accomplished using a hammer and chisel to chip away loose material, or by using a masonry grinding disc attached to a portable drill for a more aggressive removal. Always wear appropriate personal protective equipment, including eye protection and waterproof gloves, when working with cement-based products or operating power tools.
Goal: Prepare a solid base for the repair material
What's used
Tools
- Chisel
- Eye Protection
- Hammer
- Masonry Grinding Disc
- Portable Drill
- Waterproof Gloves
About the full video
This project provides step-by-step instructions for repairing broken concrete edges and corners using a fast-setting repair material and an acrylic fortifier. The process covers essential surface preparation, proper mixing techniques, and precise application and sculpting of the repair material to ensure a durable and permanent fix without the need for traditional forms.
Step 2 of 6: Undercut Edges for Better Adhesion
Using a cold chisel and a hammer, carefully chip away at the edges of the damaged concrete. The goal is to create a slightly wider opening at the base than at the surface. This 'undercutting' technique ensures that the repair material has more surface area to bond to and creates a stronger, more durable repair that is less likely to pop out.
Every video in How to Fix a Crumbling Concrete Step Corner
Step 1: Clean the Damaged Area
- 1:36–3:50 Clean Out Loose Concrete and Debris
- 0:58–1:49 Clean Surface with Wire Brush and Broom
- 0:33–1:10 Prepare Damaged Concrete Surface
Step 2: Undercut Edges for Better Adhesion
- 0:30–0:45 Prepare Damaged Area
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
- 0:27–0:56 Remove Unsound Concrete (this video)
Step 3: Mix Concrete Repair Material
- 3:49–4:29 Mix the Fast-Setting Repair Mortar
- 0:32–0:40 Mix Concrete Repair Material
- 1:32–2:17 Mix the Quick-Setting Cement
Step 4: Apply Concrete Repair Material
- 0:49–1:16 Fill and Shape with Patching Cement
- 3:43–4:30 Apply and Smooth Cement
- 2:32–3:19 Apply and Rough Shape Cement
Step 5: Shape and Finish the Repair
- 1:16–1:29 Finish and Blend the Surface
- 7:09–8:52 Shape and Finish the Mortar
- 3:19–4:06 Finish with Sponge Float
Step 6: Cure the Repaired Area
- 5:21–5:39 Water Cure Repaired Concrete Steps
- 2:52–3:01 Cure the Repaired Concrete
- 2:32–2:45 Cure Cementitious Repairs
How to Fix a Crumbling Concrete Step Corner
This project outlines the steps to repair a crumbling concrete step corner, involving cleaning, repairing, and resurfacing the damaged area to restore its structural integrity and appearance.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

