Mix the Fast-Setting Repair Mortar
From How to Fix a Crumbling Concrete Step Corner · Step 3 of 6 · Video by UVM Extension Agricultural Engineering

Showing 3:49–4:29 of the source video. Watch the full video with every moment.
What happens in this clip
Gather your quick-setting repair mortar and mixing tools. Pour the quick-setting cement into a clean bucket. Add water according to the manufacturer's instructions. The video suggests a 5:1 cement-to-water ratio but notes that it can be thinned out slightly for easier application. Use a 2-inch margin trowel for mixing the mortar thoroughly until it reaches a consistent, workable paste. The margin trowel is also suitable for the initial application.
Goal: Prepare the patching compound to the correct consistency.
What's used
Tools
- Clean Bucket Ace Hardware
- Wheelbarrow for larger batches
- Margin Trowel (2-inch)
Materials
- Fast-Setting Repair Mortar / Concrete (Quikrete) Quikrete
- DAP Concrete Patch
- Water Tap water
About the full video
This project provides step-by-step instructions on how to repair pitted and damaged concrete surfaces using a fast-setting patching compound. The process involves thoroughly cleaning the affected area by removing loose debris, scrubbing with a concrete cleaner, and then applying and smoothing the repair mortar for a seamless and durable finish.
Step 3 of 6: Mix Concrete Repair Material
Read the instructions on the concrete repair product packaging carefully. In a clean mixing container, add the specified amount of water or bonding agent, then gradually add the dry repair material. Mix thoroughly with a trowel or mixing paddle until a uniform, lump-free consistency is achieved. The mixture should be firm enough to hold its shape but soft enough to be spreadable and workable. Avoid over-mixing or mixing too much material at once, as it can begin to harden.
Every video in How to Fix a Crumbling Concrete Step Corner
Step 1: Clean the Damaged Area
- 1:36–3:50 Clean Out Loose Concrete and Debris
- 0:58–1:49 Clean Surface with Wire Brush and Broom
- 0:33–1:10 Prepare Damaged Concrete Surface
Step 2: Undercut Edges for Better Adhesion
- 0:30–0:45 Prepare Damaged Area
- 0:43–1:02 Prepare Damaged Concrete and Install Forms
- 0:27–0:56 Remove Unsound Concrete
Step 3: Mix Concrete Repair Material
- 3:49–4:29 Mix the Fast-Setting Repair Mortar (this video)
- 0:32–0:40 Mix Concrete Repair Material
- 1:32–2:17 Mix the Quick-Setting Cement
Step 4: Apply Concrete Repair Material
- 0:49–1:16 Fill and Shape with Patching Cement
- 3:43–4:30 Apply and Smooth Cement
- 2:32–3:19 Apply and Rough Shape Cement
Step 5: Shape and Finish the Repair
- 1:16–1:29 Finish and Blend the Surface
- 7:09–8:52 Shape and Finish the Mortar
- 3:19–4:06 Finish with Sponge Float
Step 6: Cure the Repaired Area
- 5:21–5:39 Water Cure Repaired Concrete Steps
- 2:52–3:01 Cure the Repaired Concrete
- 2:32–2:45 Cure Cementitious Repairs
How to Fix a Crumbling Concrete Step Corner
This project outlines the steps to repair a crumbling concrete step corner, involving cleaning, repairing, and resurfacing the damaged area to restore its structural integrity and appearance.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

