Sand Filled Areas Smooth

What happens in this clip

After the wood filler has completely dried (refer to product instructions for drying times), it's time to sand. Use a fine-grit sanding sponge (or fine-grit sandpaper wrapped around a sanding block) to gently sand the filled areas. The goal is to remove any excess filler and create a smooth, flush surface that blends seamlessly with the rest of the trim, eliminating imperfections and preparing it for paint.

What's used

Tools

• Fine-Grit Sanding Sponge
• 220-grit) wrapped around a sanding block

About the full video

This project provides detailed instructions on preparing installed trim for painting. It covers recessing nail heads, filling imperfections with wood filler, sanding the filled areas smooth with fine-grit sandpaper, and caulking all joints for a seamless finish, ensuring the trim is perfectly prepped for paint application.

Step 9 of 10: Sand and Prep for Painting

Once the wood filler is dry, lightly sand all the filled nail holes and any rough spots on the new skirt boards and trim with fine-grit sandpaper. The goal is to create a smooth surface for painting. After sanding, wipe down all surfaces with a tack cloth or a slightly damp cloth to remove all dust.

Open this step in the guide

Other videos for this step

• Sand Filled Areas Smooth
• Fill and Sand Imperfections