Adhere Skirting Boards to Wall

What happens in this clip

Once all pieces are cut and test-fitted, begin attaching them to the wall. Apply a strong adhesive, such as Fix All X-Treme (seen in a black tube with a red nozzle), to the back of each skirting piece. Press the pieces firmly against the wall, ensuring they are level and the mitered joints are tight. Work your way up the staircase, step by step, adhering each section.

Goal: Securely attach all cut skirting pieces to the wall.

What's used

Tools

• Caulk Gun

Materials

• Adhesive (Fix All X-Treme) Fix All
• Panel adhesive
• Construction adhesive
• Skirting Board

About the full video

This project details the process of installing skirting boards, also known as baseboards, along a staircase. It focuses on achieving precise mitered cuts to follow the ascending angle of the steps, ensuring a clean and continuous finish. The installation involves cutting, test-fitting, adhering the skirting to the wall, and then sealing all seams with caulk for a professional appearance.

Step 7 of 10: Install New Trim (Base Shoe/Quarter-Round)

Measure and cut your chosen trim (e.g., base shoe or quarter-round) to fit the length of the skirt board. Apply a small amount of construction adhesive to the back of the trim. Press the trim into place along the bottom edge of the skirt board and against the floor. Secure it with finish nails, ensuring they are placed at an angle to go into the skirt board and not the floor sub-straight if possible. Drive nails just below the surface.

Open this step in the guide

Other videos for this step

• Fit Skirting Board to Wall