Measure Winder Steps Width
From How to Measure Stairs That Are Different Widths · Step 7 of 8 · Video by The Home Improvements Channel UK

Showing 7:25–8:46 of the source video. Watch the full video with every moment.
What happens in this clip
After measuring the depth, measure the width of each winder step. This is typically the widest part of the step. Place the tape measure at the furthest corner on one side and extend it to the furthest corner on the opposite side. Do not measure only the narrowest front edge, as this will lead to insufficient material. Always measure the furthest points of the step's width. Add extra material (e.g., 6 inches) to these width measurements as well.
Goal: Measure the widest point of each winder step, from the furthest edge to the opposite furthest point.
What's used
Tools
- Notebook/Paper
- Pencil
- Tape Measure
About the full video
This video provides detailed instructions on how to measure winder stairs (angled or pie-shaped steps) for carpet installation, considering pile direction and allowing for extra material during cuts. It covers measuring top landings, straight stairs, winder steps, and half landings, culminating in creating a custom carpet plan based on these precise measurements.
Step 7 of 8: Measure Stair Width
Measure the width of the stair opening from the edge of the finished wall or railing post at the bottom to the corresponding edge at the top. Take measurements at the bottom, middle, and top of the stair area to account for any variations.
Every video in How to Measure Stairs That Are Different Widths
Step 1: Measure Total Rise
- 0:15–0:29 Measure Total Rise
- 0:04–0:30 Measure Total Rise
- 0:46–2:06 Measure Total Rise
Step 2: Determine Number of Risers
- 0:32–0:54 Calculate Number of Risers
- 0:28–1:03 Calculate Approximate Number of Risers
- 7:42–8:55 Calculate Number of Risers
Step 3: Calculate Exact Riser Height
- 4:32–5:10 Calculate Individual Riser Height
- 1:03–1:44 Calculate Riser Height (Option 1)
- 0:23–1:30 Calculate Unit Rise
Step 4: Measure Total Run
- 0:15–0:29 Measure Total Rise
- 2:06–3:02 Measure Total Run
- 6:51–8:30 Calculate Total Run
Step 5: Determine Number of Treads
Step 6: Calculate Exact Tread Depth
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 1:31–2:57 Calculate Unit Run and Total Run
- 0:29–1:07 Calculate Rise and Run
Step 7: Measure Stair Width
- 7:25–8:46 Measure Winder Steps Width (this video)
- 0:00–0:03 Measure Individual Stair Components
- 7:30–8:50 Measure Total Width of Stair Opening
Step 8: Document All Measurements
- 0:01–0:11 Measure Total Rise
- 1:29–2:36 Count Risers and Measure Tread Thickness
- 22:56–30:46 Add Dimensions and Export Drawing
How to Measure Stairs That Are Different Widths
Outline for measuring stairs with varying widths, focusing on consistent and accurate data collection for any DIY project involving stair construction, modification, or replacement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

