Calculate Rise and Run
From How to Measure Stairs That Are Different Widths · Step 6 of 8 · Video by Building and DIY

Showing 0:29–1:07 of the source video. Watch the full video with every moment.
What happens in this clip
Using the total rise measurement (109 inches), calculate the individual rise and run for each step. Start by dividing the total rise by a standard comfortable riser height (e.g., 7 inches). This gives an approximate number of risers (109 / 7 = 15.5). Since you can't have half a riser, round to the nearest whole number (15 risers). Divide the total rise by the number of risers to get the exact individual riser height (109 / 15 = 7.26 inches, or approximately 7 1/4 inches). Then, determine the run (tread depth). A common rule for comfortable stairs is that the rise plus the run should total between 17 and 18 inches. With a 7 1/4 inch rise, a 10-inch run gives 17 1/4 inches, which is within the comfortable range.
Goal: Determine the precise dimensions for each individual step (rise and run)
About the full video
This project provides a step-by-step guide on how to build a flight of straight stairs, including measuring the total rise, calculating individual step dimensions, laying out and cutting stringers, installing structural supports, and finally installing the risers and treads.
Step 6 of 8: Calculate Exact Tread Depth
Divide the total run (measured in Step 4) by the number of treads (determined in Step 5). This will give you the required depth for each tread. Ensure this depth meets comfortable walking standards and local codes (often 9-11 inches).
Every video in How to Measure Stairs That Are Different Widths
Step 1: Measure Total Rise
- 0:15–0:29 Measure Total Rise
- 0:04–0:30 Measure Total Rise
- 0:46–2:06 Measure Total Rise
Step 2: Determine Number of Risers
- 0:32–0:54 Calculate Number of Risers
- 0:28–1:03 Calculate Approximate Number of Risers
- 7:42–8:55 Calculate Number of Risers
Step 3: Calculate Exact Riser Height
- 4:32–5:10 Calculate Individual Riser Height
- 1:03–1:44 Calculate Riser Height (Option 1)
- 0:23–1:30 Calculate Unit Rise
Step 4: Measure Total Run
- 0:15–0:29 Measure Total Rise
- 2:06–3:02 Measure Total Run
- 6:51–8:30 Calculate Total Run
Step 5: Determine Number of Treads
Step 6: Calculate Exact Tread Depth
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 1:31–2:57 Calculate Unit Run and Total Run
- 0:29–1:07 Calculate Rise and Run (this video)
Step 7: Measure Stair Width
- 7:25–8:46 Measure Winder Steps Width
- 0:00–0:03 Measure Individual Stair Components
- 7:30–8:50 Measure Total Width of Stair Opening
Step 8: Document All Measurements
- 0:01–0:11 Measure Total Rise
- 1:29–2:36 Count Risers and Measure Tread Thickness
- 22:56–30:46 Add Dimensions and Export Drawing
How to Measure Stairs That Are Different Widths
Outline for measuring stairs with varying widths, focusing on consistent and accurate data collection for any DIY project involving stair construction, modification, or replacement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

