powered by

Measure Individual Stair Components

From How to Measure Stairs That Are Different Widths · Step 7 of 8 · Video by The Home Improvements Channel UK

Showing 0:00–0:03 of the source video. Watch the full video with every moment.

What happens in this clip

To start, use a reliable tape measure to determine the dimensions of your stairs. First, measure the **width of a single stair tread** from wall to wall or from stringer to stringer (the side supports of the staircase). In the video, the individual measures the width of a stair tread using a tape measure. Record this measurement carefully. Next, measure the **depth of the stair tread**, which is the horizontal surface where you step. Finally, measure the **height of the stair riser**, which is the vertical part of the stair. It is crucial to measure several steps, especially if there are variations, and use the largest measurements to ensure sufficient material coverage for all stairs. Also, count the total number of individual stairs, including any landings that might require carpet.

Goal: Begin by accurately measuring the width, tread depth, and riser height of a typical stair in your staircase. These foundational measurements are critical for calculating the total material needed for both underlayment and carpet.

What's used

Tools

  • Notepad and Pen
  • Pencil/Marker
  • Tape Measure

About the full video

This detailed guide outlines the essential steps for accurately measuring stairs to determine the precise quantity of carpet and underlayment required for installation. It covers individual stair component measurements, the application of specific formulas to calculate material lengths per step, and the subsequent marking and cutting of underlayment and carpet strips. The process aims to minimize material waste and ensure a professional, well-fitted stair carpet installation.

What's said in this clip

[Music] i heard jesus did cocaine on a night out eyes wide open [Music]

Automatically transcribed from the source video.

Step 7 of 8: Measure Stair Width

Measure the width of the stair opening from the edge of the finished wall or railing post at the bottom to the corresponding edge at the top. Take measurements at the bottom, middle, and top of the stair area to account for any variations.

Open this step in the guide

Every video in How to Measure Stairs That Are Different Widths

  1. Step 1: Measure Total Rise

  2. Step 2: Determine Number of Risers

  3. Step 3: Calculate Exact Riser Height

  4. Step 4: Measure Total Run

  5. Step 5: Determine Number of Treads

  6. Step 6: Calculate Exact Tread Depth

  7. Step 7: Measure Stair Width

  8. Step 8: Document All Measurements

How to Measure Stairs That Are Different Widths

Outline for measuring stairs with varying widths, focusing on consistent and accurate data collection for any DIY project involving stair construction, modification, or replacement.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Measure Individual Stair Components — How to Measure Stairs That Are Different Widths | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.