Determine Number of Treads and Total Run
From How to Measure Stairs That Are Different Widths · Step 5 of 8 · Video by Training Hands Academy

Showing 5:36–6:42 of the source video. Watch the full video with every moment.
What happens in this clip
The number of treads and risers needed depends on how the stringer is attached at the top. * **Method 1 (Top tread flush):** If the top tread is flush with the finished upper floor, the number of treads will be equal to the number of risers (e.g., 5 risers = 5 treads). The total run is calculated by multiplying the number of treads by the unit run (e.g., 5 treads * 10 inches unit run = 50 inches total run). * **Method 2 (Top finished floor acts as tread):** If the top stringer is dropped and the top finished floor acts as the first tread, the number of treads will be one less than the number of risers (e.g., 5 risers = 4 treads). The total run is then calculated by multiplying the number of treads by the unit run (e.g., 4 treads * 10 inches unit run = 40 inches total run). For this project, Method 2 is chosen, meaning we will *cut* 4 treads and 4 risers, with the stair header acting as the fifth riser and the finished floor as the fifth tread.
Goal: Calculate the number of steps and the overall horizontal length
About the full video
This project provides a detailed guide on how to figure out the dimensions, lay out, and cut stair stringers for a basic set of stairs. It covers essential terminology, mathematical calculations for total rise, total run, unit rise, and unit run, as well as considerations for attachment methods and tread thickness. The instructions culminate in the marking and cutting of a wooden stringer using a framing square, circular saw, and hand saw.
Step 5 of 8: Determine Number of Treads
The number of treads is typically one less than the number of risers. For example, if you have 10 risers, you will need 9 treads. The top riser usually meets the upper floor surface.
Every video in How to Measure Stairs That Are Different Widths
Step 1: Measure Total Rise
- 0:15–0:29 Measure Total Rise
- 0:04–0:30 Measure Total Rise
- 0:46–2:06 Measure Total Rise
Step 2: Determine Number of Risers
- 0:32–0:54 Calculate Number of Risers
- 0:28–1:03 Calculate Approximate Number of Risers
- 7:42–8:55 Calculate Number of Risers
Step 3: Calculate Exact Riser Height
- 4:32–5:10 Calculate Individual Riser Height
- 1:03–1:44 Calculate Riser Height (Option 1)
- 0:23–1:30 Calculate Unit Rise
Step 4: Measure Total Run
- 0:15–0:29 Measure Total Rise
- 2:06–3:02 Measure Total Run
- 6:51–8:30 Calculate Total Run
Step 5: Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 0:54–1:13 Determine Number of Treads
- 5:36–6:42 Determine Number of Treads and Total Run (this video)
Step 6: Calculate Exact Tread Depth
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 1:31–2:57 Calculate Unit Run and Total Run
- 0:29–1:07 Calculate Rise and Run
Step 7: Measure Stair Width
- 7:25–8:46 Measure Winder Steps Width
- 0:00–0:03 Measure Individual Stair Components
- 7:30–8:50 Measure Total Width of Stair Opening
Step 8: Document All Measurements
- 0:01–0:11 Measure Total Rise
- 1:29–2:36 Count Risers and Measure Tread Thickness
- 22:56–30:46 Add Dimensions and Export Drawing
How to Measure Stairs That Are Different Widths
Outline for measuring stairs with varying widths, focusing on consistent and accurate data collection for any DIY project involving stair construction, modification, or replacement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

