Measure Total Rise
From How to Measure Stairs That Are Different Widths · Step 4 of 8 · Video by Building and DIY

Showing 0:15–0:29 of the source video. Watch the full video with every moment.
What happens in this clip
The first step is to accurately measure the total vertical distance that the stairs will cover. Use a tape measure to measure from the top surface of the subfloor (or finished floor, depending on the final flooring material) on the lower level to the top surface of the subfloor (or finished floor) on the upper level. This measurement is crucial for calculating the rise and run of each step. In this video, the measurement is 109 inches.
Goal: Determine the overall vertical height the stairs need to span
What's used
Tools
- Tape Measure
About the full video
This project provides a step-by-step guide on how to build a flight of straight stairs, including measuring the total rise, calculating individual step dimensions, laying out and cutting stringers, installing structural supports, and finally installing the risers and treads.
Step 4 of 8: Measure Total Run
Measure the total horizontal distance available for the stairs, from the face of the first riser to the edge of the landing or the point where the last riser meets the upper floor. This is your total run.
Every video in How to Measure Stairs That Are Different Widths
Step 1: Measure Total Rise
- 0:15–0:29 Measure Total Rise
- 0:04–0:30 Measure Total Rise
- 0:46–2:06 Measure Total Rise
Step 2: Determine Number of Risers
- 0:32–0:54 Calculate Number of Risers
- 0:28–1:03 Calculate Approximate Number of Risers
- 7:42–8:55 Calculate Number of Risers
Step 3: Calculate Exact Riser Height
- 4:32–5:10 Calculate Individual Riser Height
- 1:03–1:44 Calculate Riser Height (Option 1)
- 0:23–1:30 Calculate Unit Rise
Step 4: Measure Total Run
- 0:15–0:29 Measure Total Rise (this video)
- 2:06–3:02 Measure Total Run
- 6:51–8:30 Calculate Total Run
Step 5: Determine Number of Treads
Step 6: Calculate Exact Tread Depth
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 1:31–2:57 Calculate Unit Run and Total Run
- 0:29–1:07 Calculate Rise and Run
Step 7: Measure Stair Width
- 7:25–8:46 Measure Winder Steps Width
- 0:00–0:03 Measure Individual Stair Components
- 7:30–8:50 Measure Total Width of Stair Opening
Step 8: Document All Measurements
- 0:01–0:11 Measure Total Rise
- 1:29–2:36 Count Risers and Measure Tread Thickness
- 22:56–30:46 Add Dimensions and Export Drawing
How to Measure Stairs That Are Different Widths
Outline for measuring stairs with varying widths, focusing on consistent and accurate data collection for any DIY project involving stair construction, modification, or replacement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

