powered by

Calculate Unit Run and Total Run

From How to Measure Stairs That Are Different Widths · Step 6 of 8 · Video by The BC Builder

Showing 1:31–2:57 of the source video. Watch the full video with every moment.

What happens in this clip

Now, determine the 'unit run' (the depth of each step) and the 'total run' (the overall horizontal distance the stairs will cover). A golden rule for comfortable stairs is that the sum of the unit rise and unit run should be between 17 to 18 inches. Given a unit rise of 7.25 inches, a unit run of approximately 10 to 10.5 inches would be suitable (e.g., 10.25 inches). To find the total run, count the number of rises determined in the previous step (e.g., 8 rises). The number of treads (or unit runs) will typically be one less than the number of rises. So, for 8 rises, there will be 7 runs. Multiply the unit run by the number of runs to get the total run. For example, 10.25 inches (unit run) * 7 (runs) = 71.75 inches total run.

Goal: Determine the depth of each step and the overall horizontal length of the stairs.

What's used

Tools

  • Calculator
  • Marker
  • Whiteboard

About the full video

This project provides a comprehensive guide on calculating and building a simple set of stairs. It covers the essential mathematics behind determining unit rise and run, understanding crucial adjustments for tread thickness, and the practical application of a framing square for laying out stringers. The video concludes with instructions on cutting and assembling the stair components.

Step 6 of 8: Calculate Exact Tread Depth

Divide the total run (measured in Step 4) by the number of treads (determined in Step 5). This will give you the required depth for each tread. Ensure this depth meets comfortable walking standards and local codes (often 9-11 inches).

Open this step in the guide

Every video in How to Measure Stairs That Are Different Widths

  1. Step 1: Measure Total Rise

  2. Step 2: Determine Number of Risers

  3. Step 3: Calculate Exact Riser Height

  4. Step 4: Measure Total Run

  5. Step 5: Determine Number of Treads

  6. Step 6: Calculate Exact Tread Depth

  7. Step 7: Measure Stair Width

  8. Step 8: Document All Measurements

How to Measure Stairs That Are Different Widths

Outline for measuring stairs with varying widths, focusing on consistent and accurate data collection for any DIY project involving stair construction, modification, or replacement.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Calculate Unit Run and Total Run — How to Measure Stairs That Are Different Widths | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.