Calculate Individual Riser Height & Tread Depth
From How to Measure Stairs That Are Different Widths · Step 6 of 8 · Video by AwesomeFramers

Showing 2:05–2:24 of the source video. Watch the full video with every moment.
What happens in this clip
Using the total calculated rise of 119 3/8 inches, divide this by the total number of risers (16). This calculation yields an individual riser height of 7 7/16 inches. This ensures all risers are equal in height, which is essential for safety and craftsmanship. Simultaneously, determine the desired tread depth (run). A standard tread depth of 10 inches is chosen for this staircase. These two dimensions (7 7/16" rise and 10" tread) will be used to mark the stringers.
Goal: Divide the total rise by the number of risers to find the exact height of each individual riser. Select a suitable tread depth (run).
What's used
Tools
- Construction Calculator
- Marker
About the full video
This video provides a detailed guide on how to calculate, mark, and cut stair stringers using mathematical calculations and gang-cutting techniques. It emphasizes the importance of precise measurements for total rise, individual riser height, and tread depth, adjusting for flooring and tread/riser material thickness. The video also highlights the advantages of using LVL (Laminated Veneer Lumber) over traditional lumber for consistency and durability in stair construction.
What's said in this clip
And that is from the top of the floor down to here. So, we're going to divide that by 16. I think it was 119. Yeah. 119 and 38. Always double check yourself twice. So 119 and 3/8 divided by 16 is a 7 and 7/16 riser riser. And we're going to go with a 10-in tread. I have to figure out where my two landings are. So if I look at this guy
Automatically transcribed from the source video.
Step 6 of 8: Calculate Exact Tread Depth
Divide the total run (measured in Step 4) by the number of treads (determined in Step 5). This will give you the required depth for each tread. Ensure this depth meets comfortable walking standards and local codes (often 9-11 inches).
Every video in How to Measure Stairs That Are Different Widths
Step 1: Measure Total Rise
- 0:15–0:29 Measure Total Rise
- 0:04–0:30 Measure Total Rise
- 0:46–2:06 Measure Total Rise
Step 2: Determine Number of Risers
- 0:32–0:54 Calculate Number of Risers
- 0:28–1:03 Calculate Approximate Number of Risers
- 7:42–8:55 Calculate Number of Risers
Step 3: Calculate Exact Riser Height
- 4:32–5:10 Calculate Individual Riser Height
- 1:03–1:44 Calculate Riser Height (Option 1)
- 0:23–1:30 Calculate Unit Rise
Step 4: Measure Total Run
- 0:15–0:29 Measure Total Rise
- 2:06–3:02 Measure Total Run
- 6:51–8:30 Calculate Total Run
Step 5: Determine Number of Treads
Step 6: Calculate Exact Tread Depth
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth (this video)
- 1:31–2:57 Calculate Unit Run and Total Run
- 0:29–1:07 Calculate Rise and Run
Step 7: Measure Stair Width
- 7:25–8:46 Measure Winder Steps Width
- 0:00–0:03 Measure Individual Stair Components
- 7:30–8:50 Measure Total Width of Stair Opening
Step 8: Document All Measurements
- 0:01–0:11 Measure Total Rise
- 1:29–2:36 Count Risers and Measure Tread Thickness
- 22:56–30:46 Add Dimensions and Export Drawing
How to Measure Stairs That Are Different Widths
Outline for measuring stairs with varying widths, focusing on consistent and accurate data collection for any DIY project involving stair construction, modification, or replacement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

