Determine Number of Treads
From How to Measure Stairs That Are Different Widths · Step 5 of 8 · Video by stairbuilding

Showing 0:54–1:13 of the source video. Watch the full video with every moment.
What happens in this clip
A critical rule in stair layout is that the number of treads is always one less than the number of risers. This is because the deck itself serves as the final top step, eliminating the need for an additional tread at the very top. So, if you have 8 risers, you will need 7 treads.
Goal: Apply the 'number of risers minus one' rule to find the correct number of treads needed for your stair stringers.
About the full video
This video provides step-by-step instructions for accurately laying out deck stair stringers by calculating the total rise, determining the number of risers and treads, and then calculating the total run to find the precise landing point for the stairs. This method helps avoid common mistakes in stair construction.
Step 5 of 8: Determine Number of Treads
The number of treads is typically one less than the number of risers. For example, if you have 10 risers, you will need 9 treads. The top riser usually meets the upper floor surface.
Every video in How to Measure Stairs That Are Different Widths
Step 1: Measure Total Rise
- 0:15–0:29 Measure Total Rise
- 0:04–0:30 Measure Total Rise
- 0:46–2:06 Measure Total Rise
Step 2: Determine Number of Risers
- 0:32–0:54 Calculate Number of Risers
- 0:28–1:03 Calculate Approximate Number of Risers
- 7:42–8:55 Calculate Number of Risers
Step 3: Calculate Exact Riser Height
- 4:32–5:10 Calculate Individual Riser Height
- 1:03–1:44 Calculate Riser Height (Option 1)
- 0:23–1:30 Calculate Unit Rise
Step 4: Measure Total Run
- 0:15–0:29 Measure Total Rise
- 2:06–3:02 Measure Total Run
- 6:51–8:30 Calculate Total Run
Step 5: Determine Number of Treads
- 3:54–5:04 Calculate the Number of Treads and Understand the Logic
- 0:54–1:13 Determine Number of Treads (this video)
- 5:36–6:42 Determine Number of Treads and Total Run
Step 6: Calculate Exact Tread Depth
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 1:31–2:57 Calculate Unit Run and Total Run
- 0:29–1:07 Calculate Rise and Run
Step 7: Measure Stair Width
- 7:25–8:46 Measure Winder Steps Width
- 0:00–0:03 Measure Individual Stair Components
- 7:30–8:50 Measure Total Width of Stair Opening
Step 8: Document All Measurements
- 0:01–0:11 Measure Total Rise
- 1:29–2:36 Count Risers and Measure Tread Thickness
- 22:56–30:46 Add Dimensions and Export Drawing
How to Measure Stairs That Are Different Widths
Outline for measuring stairs with varying widths, focusing on consistent and accurate data collection for any DIY project involving stair construction, modification, or replacement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

