Measure Total Rise
From How to Measure Stairs That Are Different Widths · Step 1 of 8 · Video by Frugal Off Grid

Showing 0:04–0:30 of the source video. Watch the full video with every moment.
What happens in this clip
Begin by accurately measuring the total vertical rise that the staircase needs to cover. This measurement should be taken from the top of the finished lower floor to the top of the finished upper floor. If the finished flooring on the upper level is not yet installed, measure to the top of the subfloor and add the anticipated thickness of the finished flooring (e.g., 2 inches as mentioned in the video for future boards). This overall height is crucial for calculating consistent step dimensions.
Goal: Measure the total vertical distance from the finished lower floor surface to the finished upper floor surface, accounting for any future flooring installations.
What's used
Tools
- Tape Measure
About the full video
This video provides a practical method for accurately laying out stair stringers to ensure consistent and comfortable steps. The technique focuses on precise measurements and calculations for individual rise and run, followed by using a speed square for marking and creating a cut-off piece as a jig to maintain accuracy across all steps, while also accounting for finished flooring thickness.
What's said in this clip
stairs the first step is to measure from a finished surface to a finished surface so if you didn't have that flooring up there yet you would just measure from the finished surface to what the finished surface will be in the future those boards are 2 in thick so you would add 2 in to the joist hangers finish surface to finish surface in this case it's 85.5 in
Automatically transcribed from the source video.
Step 1 of 8: Measure Total Rise
Using a tape measure, carefully measure the total vertical distance from the finished surface of the lower floor to the finished surface of the upper floor. This measurement is crucial for determining the overall height the stairs need to span.
Every video in How to Measure Stairs That Are Different Widths
Step 1: Measure Total Rise
- 0:15–0:29 Measure Total Rise
- 0:04–0:30 Measure Total Rise (this video)
- 0:46–2:06 Measure Total Rise
Step 2: Determine Number of Risers
- 0:32–0:54 Calculate Number of Risers
- 0:28–1:03 Calculate Approximate Number of Risers
- 7:42–8:55 Calculate Number of Risers
Step 3: Calculate Exact Riser Height
- 4:32–5:10 Calculate Individual Riser Height
- 1:03–1:44 Calculate Riser Height (Option 1)
- 0:23–1:30 Calculate Unit Rise
Step 4: Measure Total Run
- 0:15–0:29 Measure Total Rise
- 2:06–3:02 Measure Total Run
- 6:51–8:30 Calculate Total Run
Step 5: Determine Number of Treads
Step 6: Calculate Exact Tread Depth
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 1:31–2:57 Calculate Unit Run and Total Run
- 0:29–1:07 Calculate Rise and Run
Step 7: Measure Stair Width
- 7:25–8:46 Measure Winder Steps Width
- 0:00–0:03 Measure Individual Stair Components
- 7:30–8:50 Measure Total Width of Stair Opening
Step 8: Document All Measurements
- 0:01–0:11 Measure Total Rise
- 1:29–2:36 Count Risers and Measure Tread Thickness
- 22:56–30:46 Add Dimensions and Export Drawing
How to Measure Stairs That Are Different Widths
Outline for measuring stairs with varying widths, focusing on consistent and accurate data collection for any DIY project involving stair construction, modification, or replacement.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

