Drive Screws to Secure Tread to Riser
From How to Stop a Stair Tread from Creaking and Shifting · Step 2 of 5 · Video by The Home Improvements Channel UK

Showing 6:29–7:31 of the source video. Watch the full video with every moment.
What happens in this clip
Using the drill (or an impact driver for faster action), drive the screws into the pre-drilled and countersunk holes. Tighten the screws until the tread and riser are pulled firmly together, but avoid over-tightening to prevent stripping the screw or splitting the wood. Check underneath the stair nose to ensure the screws have not come through the riser, confirming proper measurement and pilot depth. This mechanical fastening eliminates the movement causing the squeak.
Goal: Mechanically fasten the stair tread to the riser to stop movement and squeaking.
What's used
Tools
- Drill DeWalt
- Screws
About the full video
This project provides two effective DIY methods to fix annoying squeaky stairs. The first method involves using diluted PVA glue to penetrate and secure loose joints. The second method, ideal for situations without access from underneath the stairs, uses screws to firmly attach the stair tread to the riser. Both methods aim to eliminate the movement that causes squeaks.
Step 2 of 5: Secure Loose Tread Edges
If the edges of the stair tread are loose, drive screws or finish nails through the tread and into the underlying stringer or supporting joist. For a cleaner finish, use finish nails and set them slightly below the surface, or pre-drill pilot holes and use wood screws, countersinking them so the heads are flush or slightly below the wood surface. If driving screws from the top, consider filling the holes with wood putty later for a seamless look.
Every video in How to Stop a Stair Tread from Creaking and Shifting
Step 1: Inspect the Stair Tread
- 2:21–3:48 Diagnose Creaking Causes
Step 2: Secure Loose Tread Edges
- 6:29–7:31 Drive Screws to Secure Tread to Riser (this video)
- 6:13–6:27 Secure Front Treads with Screws
- 5:17–6:11 Fasten New Treads with Screws
Step 3: Address Gaps with Shims and Adhesive
- 6:22–6:49 Apply 5-Minute Wood Adhesive
- 6:40–7:13 Apply Wood Glue (Back Risers)
- 2:05–4:08 Reinforce Risers and Treads with Adhesive and Timber
Step 4: Reinforce with Stair Tread Repair Brackets
- 4:51–8:26 Fix with Heavy-Duty Stair Angle Brackets (Method 2)
- 0:15–2:32 Fix with A35 Brackets (Method 1)
- 0:33–0:58 Utilize Prefabricated Metal Brackets
Step 5: Fill Screw Holes and Finish
- 0:22–0:30 Fill Screw Holes with Wood Putty
- 1:40–2:44 Prepare Surface by Filling Holes
- 4:25–4:47 Fill Gaps and Nail Holes
How to Stop a Stair Tread from Creaking and Shifting
Outline for a DIY project to fix a creaking and shifting stair tread.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

