powered by

HOW TO FIX LOOSE CREAKY AND SQUEAKY STAIRS #howto #stairs #repair #diy #homeimprovement #renovation

Video by The Home Improvements Channel UK · 2 moments used in Oak Valley Designs's DIY guides · 8:56 long

Moments in this video

  1. 0:44–1:08 Identify Squeak and Gather Materials for PVA Method From How to Fix Squeaky Hardwood Stairs from Above, Step 1: Locate Squeak Source

    Identify the source of the squeak, which is typically found where the back edge of the stair tread meets the riser. This is the area where the first method, using PVA glue, will be applied. Gather a container of PVA glue, a small pot for mixing, a paintbrush for application, and a bottle of water for diluting the glue.

  2. 6:29–7:31 Drive Screws to Secure Tread to Riser From How to Fix Squeaky Hardwood Stairs from Above, Step 3: Secure Loose Tread/Riser

    Using the drill (or an impact driver for faster action), drive the screws into the pre-drilled and countersunk holes. Tighten the screws until the tread and riser are pulled firmly together, but avoid over-tightening to prevent stripping the screw or splitting the wood. Check underneath the stair nose to ensure the screws have not come through the riser, confirming proper measurement and pilot depth. This mechanical fastening eliminates the movement causing the squeak.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

HOW TO FIX LOOSE CREAKY AND SQUEAKY STAIRS #howto #stairs #repair #diy #homeimprovement #renovation — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.