Fill Gaps and Nail Holes
From How to Stop a Stair Tread from Creaking and Shifting · Step 5 of 5 · Video by Dani Lyn Design

Showing 4:25–4:47 of the source video. Watch the full video with every moment.
What happens in this clip
After securing the new stair treads, use wood filler to address any imperfections. Apply wood filler to fill any gaps visible on the sides of the treads where they meet the stringers or walls. For these areas, a small metal putty knife is ideal for precise application and smoothing. For the nail holes created by the nail gun, you can simply use your finger to apply and smooth the wood filler, as it allows for better control in small depressions.
Goal: Create a smooth and seamless surface by filling gaps and nail holes on the installed treads.
What's used
Tools
- Small Metal Putty Knife Anvil
- Wood Filler
- Spackle (for painted finishes)
About the full video
This DIY project provides detailed instructions on how to replace old, worn-out stair treads with new ones. The process covers everything from initial assessment and removal of existing treads to precise measurement, cutting, secure installation using adhesive and a nail gun, and finally, filling and sanding imperfections in preparation for staining.
Step 5 of 5: Fill Screw Holes and Finish
After all repairs are complete and the adhesive has dried, fill any visible screw or nail holes. Use a wood putty or wood filler that matches the color of your stair tread. Apply the filler with a putty knife, pressing it into the holes. Once the filler is dry, sand it smooth so it is flush with the surrounding wood. If necessary, touch up the area with matching wood stain or paint.
Every video in How to Stop a Stair Tread from Creaking and Shifting
Step 1: Inspect the Stair Tread
- 2:21–3:48 Diagnose Creaking Causes
Step 2: Secure Loose Tread Edges
- 6:29–7:31 Drive Screws to Secure Tread to Riser
- 6:13–6:27 Secure Front Treads with Screws
- 5:17–6:11 Fasten New Treads with Screws
Step 3: Address Gaps with Shims and Adhesive
- 6:22–6:49 Apply 5-Minute Wood Adhesive
- 6:40–7:13 Apply Wood Glue (Back Risers)
- 2:05–4:08 Reinforce Risers and Treads with Adhesive and Timber
Step 4: Reinforce with Stair Tread Repair Brackets
- 4:51–8:26 Fix with Heavy-Duty Stair Angle Brackets (Method 2)
- 0:15–2:32 Fix with A35 Brackets (Method 1)
- 0:33–0:58 Utilize Prefabricated Metal Brackets
Step 5: Fill Screw Holes and Finish
- 0:22–0:30 Fill Screw Holes with Wood Putty
- 1:40–2:44 Prepare Surface by Filling Holes
- 4:25–4:47 Fill Gaps and Nail Holes (this video)
How to Stop a Stair Tread from Creaking and Shifting
Outline for a DIY project to fix a creaking and shifting stair tread.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

