Apply 5-Minute Wood Adhesive
From How to Stop a Stair Tread from Creaking and Shifting · Step 3 of 5 · Video by The DIY Guy

Showing 6:22–6:49 of the source video. Watch the full video with every moment.
What happens in this clip
If you encounter larger gaps (more than a millimeter) between the tread and the riser below it, standard PVA glue might not be sufficient. In such cases, use a 5-minute wood adhesive (like "Lumberjack Wood Adhesive" mentioned in the video). This type of glue hardens quickly and foams up to fill larger voids. Squeeze the adhesive directly into the gap. Once it sets, any excess foam can be easily taken off.
Goal: Fill any larger gaps between the tread and the riser below it.
What's used
Tools
- 5-Minute Wood Adhesive 5 MIN Lumberjack
- Expanding foam adhesive
About the full video
This DIY project provides a step-by-step guide to fix creaky stairs without needing access from underneath. The process involves removing the carpet and underlay, diagnosing the causes of creaks (movement in the tread-riser rebate and gaps between tread and riser), and then securely bonding and screwing these components together using various adhesives and screws. The final steps include reinstalling the underlay and carpet.
Step 3 of 5: Address Gaps with Shims and Adhesive
If there are visible gaps between the tread and the riser, or between the tread and the stringer, apply a wood adhesive into the gap. Then, carefully insert thin wood shims into the gap, tapping them gently until they are snug. The goal is to eliminate any play or movement. Trim any excess shim material flush with the tread surface once it's secure.
Every video in How to Stop a Stair Tread from Creaking and Shifting
Step 1: Inspect the Stair Tread
- 2:21–3:48 Diagnose Creaking Causes
Step 2: Secure Loose Tread Edges
- 6:29–7:31 Drive Screws to Secure Tread to Riser
- 6:13–6:27 Secure Front Treads with Screws
- 5:17–6:11 Fasten New Treads with Screws
Step 3: Address Gaps with Shims and Adhesive
- 6:22–6:49 Apply 5-Minute Wood Adhesive (this video)
- 6:40–7:13 Apply Wood Glue (Back Risers)
- 2:05–4:08 Reinforce Risers and Treads with Adhesive and Timber
Step 4: Reinforce with Stair Tread Repair Brackets
- 4:51–8:26 Fix with Heavy-Duty Stair Angle Brackets (Method 2)
- 0:15–2:32 Fix with A35 Brackets (Method 1)
- 0:33–0:58 Utilize Prefabricated Metal Brackets
Step 5: Fill Screw Holes and Finish
- 0:22–0:30 Fill Screw Holes with Wood Putty
- 1:40–2:44 Prepare Surface by Filling Holes
- 4:25–4:47 Fill Gaps and Nail Holes
How to Stop a Stair Tread from Creaking and Shifting
Outline for a DIY project to fix a creaking and shifting stair tread.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

