powered by

Fix with A35 Brackets (Method 1)

From How to Stop a Stair Tread from Creaking and Shifting · Step 4 of 5 · Video by stairbuilding

Showing 0:15–2:32 of the source video. Watch the full video with every moment.

What happens in this clip

The first method involves using a standard metal bracket, such as an A35 angle bracket, and screws. To effectively pull the tread back into the stringer's dado, the bracket must be positioned about 1/2 inch to 1 inch back from the edge of the tread. This creates a leverage point to draw the tread inward. Before installing, inspect the dado for any existing nails or screws that might obstruct the tread's movement; these should be removed if possible. While fastening, carefully monitor the tread's movement. If significant force is required or the tread is severely loose, consider using multiple brackets per tread or on adjacent treads to distribute the pulling force. It is crucial to simultaneously monitor the opposite side of the tread to prevent it from pulling out of the other stringer's dado.

Goal: Re-secure loose stair treads using standard metal brackets

What's used

Tools

  • A35 Bracket A35 (example)
  • L-bracket
  • Cordless Drill
  • Manual screwdriver
  • Screws
  • Construction screws

About the full video

This video provides two methods for fixing loose stair treads that have pulled away from their stringer dado. It demonstrates how to use both standard A35 brackets and heavy-duty stair angle brackets to pull the tread back into place and secure it, emphasizing careful technique to avoid further damage.

What's said in this clip

Stringer now the first method I'm suggesting to use would be to use some type of a bracket and some screws and then move the bracket back the bracket is going to need to be moved back remember because the slot uh the DAT or the tread needs to slide back into the slot if you have it at the edge if you have the bracket at the edge you're not going to be able to pull it very you're not going to be able to slide the tread into the slot now I would like to point out one more thing there's a good chance that you are going to have something some nails or screws in the slot if you can't remove them you can't remove them at all then um you might need to actually just install a bracket I'm suggesting this if you cannot move the tread if you can't use this method or the second method I'm going to show you then you might actually need to just install some type of a metal bracket here or rebuild the stairway so because it's not uncommon to have nails or screws where someone has either nailed the tread from this side or nailed it from this side and if if the stairway has pulled apart the tread has separated from the Stringer you might be able to slide it back in with the nails or screws in place or at least slide it enough to where you can use some brackets here to um make the Treads a little uh safer to walk on where you wouldn't have to worry about it again so this is one method here if you need to use a little more Force then I would suggest using multiple brackets uh might need to even might need to even put more of the brackets on other steps because it's it's uh sometimes it's going to take a lot more Force to put this thing back together than it will than it did to have it uh come apart so you could install more brackets up as needed now one thing I would like to

Automatically transcribed from the source video.

Step 4 of 5: Reinforce with Stair Tread Repair Brackets

For persistent creaking or shifting, install stair tread repair brackets. These metal brackets typically screw into the underside of the tread and the front edge of the riser, or into the stringer. Follow the manufacturer's instructions for the specific bracket system you are using. This often involves positioning the bracket, marking screw locations, pre-drilling, and then driving the screws firmly to secure the tread.

Open this step in the guide

Every video in How to Stop a Stair Tread from Creaking and Shifting

  1. Step 1: Inspect the Stair Tread

  2. Step 2: Secure Loose Tread Edges

  3. Step 3: Address Gaps with Shims and Adhesive

  4. Step 4: Reinforce with Stair Tread Repair Brackets

  5. Step 5: Fill Screw Holes and Finish

Questions about How to Stop a Stair Tread from Creaking and Shifting

How difficult is it to fix a creaking stair tread, and how long should it take for a beginner?

This DIY project is considered beginner-friendly. Most individuals can complete the repair for one or two treads within approximately 3 hours, including inspection, repair, and basic finishing. The main challenges are accurately locating the source of the creak and working in tight spaces.

What are the most crucial tools or materials I absolutely shouldn't skip for this project?

While a hammer and drill are basic, don't skip wood glue/epoxy and shims, as these directly address gaps causing creaks. A countersink set ensures screws sit flush and prevent wood splitting. Stair tread repair brackets are also highly effective for providing long-term stability and should be used if the tread shifts significantly.

What are common mistakes people make when trying to fix a creaking stair and how can I avoid them?

A common mistake is not fully identifying all points of movement; thoroughly inspect with a flashlight. Another is overtightening screws, which can split the wood. Ensure shims are snug but not forced, and use ample wood glue to secure them. Not using a countersink drill bit for screws can also lead to an uneven finish or exposed screw heads.

Are there any safety precautions I should take when working on stairs?

Always ensure the stairs are clear of clutter and well-lit. If you are working on a main staircase, consider blocking it off temporarily to prevent anyone from stepping on unstable treads during the repair. Wear appropriate safety glasses when drilling or using a chisel to protect your eyes from debris.

My stair tread is severely damaged, or the creaking returns after trying this fix. What should I do next?

If a tread is severely damaged, rotting, or the creaking persists after a thorough repair, it might indicate a larger structural issue with the stringers or risers supporting the stairs. In such cases, this DIY fix might not be sufficient, and it's best to consult a professional carpenter or stair builder for a more comprehensive assessment and repair.

How do I pinpoint the exact location of the creak and know where to apply shims or screws?

Have someone slowly walk up and down the stairs while you listen closely and visually inspect for movement in the tread, riser, or stringer. Use a flashlight to look underneath the tread for gaps between the tread and the stringers or risers. The areas with visible movement or audible creaks are where shims, adhesive, or screws should be applied.

How to Stop a Stair Tread from Creaking and Shifting

Outline for a DIY project to fix a creaking and shifting stair tread.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Fix with A35 Brackets (Method 1) — How to Stop a Stair Tread from Creaking and Shifting | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.