Correct Straight Stringer Layout
From How to Lay Out a Stair Stringer with a Framing Square · Step 5 of 6 · Video by stairbuilding

Showing 3:45–4:47 of the source video. Watch the full video with every moment.
What happens in this clip
This step demonstrates the correct method for laying out a straight stair stringer when incorporating a 1-inch nosing. The stringer's tread cut should be exactly 10 inches deep (to support an 11-inch tread with 1-inch nosing) and the riser height is 7 inches. The treads themselves will be 11 inches long and 3/4 inch thick, with risers also 3/4 inch thick. By laying out the stringer with a 10-inch tread dimension, the 11-inch treads will naturally create the desired 1-inch overhang (nosing) without making the stringer itself too long. This ensures the stair stringer length is accurate for the desired finished stair dimensions.
What's used
Materials
- Stair Riser
- Stair Tread
About the full video
This video provides detailed instructions and warnings on how to accurately lay out stair stringers, emphasizing the critical error of incorrectly adding nosing measurements to the stringer layout. It demonstrates the impact of this mistake on straight stairs and then extends the principle to winding stairs, showing how to adjust the layout to correctly incorporate nosing, preventing the stringer from being too long or the treads from misaligning.
Step 5 of 6: Mark the Nosing and Final Cut
After marking all the riser and tread lines, you need to account for the nosing, which is the part of the tread that overhangs the riser. Typically, this is about 1 inch. On your last tread mark, measure out the nosing distance (e.g., 1 inch) beyond the last riser line. This will create your nosing line. The final cut at the bottom of the stringer will be determined by this nosing line and the angle of the last tread. This creates the shape of the stringer that will sit flush on the lower subfloor.
Every video in How to Lay Out a Stair Stringer with a Framing Square
Step 1: Determine Total Rise and Run
- 0:15–0:29 Measure Total Rise
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise
Step 2: Calculate Number of Risers and Treads
- 2:59–6:51 Calculate Number of Risers and Treads
- 0:32–0:54 Calculate Number of Risers
- 8:59–9:54 Calculate Number of Risers and Treads
Step 3: Calculate Riser and Tread Dimensions
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 0:29–1:07 Calculate Rise and Run
- 3:02–4:45 Calculate Rise and Run Dimensions
Step 4: Mark the Stair Stringer with a Framing Square
- 2:53–7:59 Mark the Stringers and Adjust for Treads
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 6:59–9:34 Mark the Stair Stringer for Cutting
Step 5: Mark the Nosing and Final Cut
- 3:45–4:47 Correct Straight Stringer Layout (this video)
- 8:10–9:35 Mark Top and Bottom Stringer Cuts
- 3:10–3:59 Mark the Stringer Board
Step 6: Cut the Stair Stringer
- 0:42–0:53 Cut the Stringers
- 15:12–19:27 Cutting the Stair Stringer
- 2:42–3:34 Cut Stair Stringers
How to Lay Out a Stair Stringer with a Framing Square
This project outlines the process of accurately marking and laying out a stair stringer using a framing square, a crucial step for ensuring safe and correctly proportioned stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

