Calculate Number of Risers and Treads
From How to Lay Out a Stair Stringer with a Framing Square · Step 2 of 6 · Video by stairbuilding

Showing 2:59–6:51 of the source video. Watch the full video with every moment.
What happens in this clip
Measure the total vertical distance (total rise) from the top of the lower floor (where the stairs begin) to the top of the upper floor (where the stairs end). For instance, if the measurement is 8 feet 9 inches (105 inches). Then, divide the total rise (in inches) by a desired individual riser height (e.g., 7 or 7.5 inches, common building code standards) to determine the number of risers. For example, 105 inches / 7.5 inches = 14 risers. Remember that the number of treads will be one less than the number of risers.
Goal: Determine the vertical step count for the staircase
What's used
Tools
- Calculator Windows Standard Calculator (shown)
- Smartphone calculator app
- Tape Measure
About the full video
This guide demonstrates essential techniques for accurately verifying stair stringer layout markings on a floor using a level and framing square before any cuts are made. It covers how to mark tread depths, align stringers to these marks, account for riser thickness and nosing, and calculate the number of risers and treads based on total rise and run to ensure precision and prevent costly errors in stair construction.
Step 2 of 6: Calculate Number of Risers and Treads
To calculate the number of risers, divide the total rise by your desired riser height. A common and comfortable riser height is between 7 and 7.5 inches. For example, if your total rise is 108 inches, and you aim for a 7-inch riser, you would divide 108 by 7, resulting in approximately 15.4 risers. You must round this to a whole number, either 15 or 16. It's often best to adjust the riser height slightly to achieve a whole number of risers. The number of treads will be one less than the number of risers. For instance, if you have 15 risers, you will have 14 treads.
Every video in How to Lay Out a Stair Stringer with a Framing Square
Step 1: Determine Total Rise and Run
- 0:15–0:29 Measure Total Rise
- 0:16–1:17 Measure and Calculate Total Rise
- 0:04–0:30 Measure Total Rise
Step 2: Calculate Number of Risers and Treads
- 2:59–6:51 Calculate Number of Risers and Treads (this video)
- 0:32–0:54 Calculate Number of Risers
- 8:59–9:54 Calculate Number of Risers and Treads
Step 3: Calculate Riser and Tread Dimensions
- 2:05–2:24 Calculate Individual Riser Height & Tread Depth
- 0:29–1:07 Calculate Rise and Run
- 3:02–4:45 Calculate Rise and Run Dimensions
Step 4: Mark the Stair Stringer with a Framing Square
- 2:53–7:59 Mark the Stringers and Adjust for Treads
- 6:42–8:10 Lay Out the Stringer Using a Framing Square
- 6:59–9:34 Mark the Stair Stringer for Cutting
Step 5: Mark the Nosing and Final Cut
- 3:45–4:47 Correct Straight Stringer Layout
- 8:10–9:35 Mark Top and Bottom Stringer Cuts
- 3:10–3:59 Mark the Stringer Board
Step 6: Cut the Stair Stringer
- 0:42–0:53 Cut the Stringers
- 15:12–19:27 Cutting the Stair Stringer
- 2:42–3:34 Cut Stair Stringers
How to Lay Out a Stair Stringer with a Framing Square
This project outlines the process of accurately marking and laying out a stair stringer using a framing square, a crucial step for ensuring safe and correctly proportioned stairs.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

